Table of Contents
Advertisement
EAS30159
CHECKING THE REAR WHEEL
1. Check:
• Wheel axle
• Wheel bearings
• Oil seals
Refer to "CHECKING THE FRONT WHEEL"
on page 4-12.
2. Check:
• Tire
• Rear wheel
Damage/wear Replace.
Refer to "CHECKING THE TIRES" on page
3-16 and "CHECKING THE WHEELS" on
page 3-15.
3. Measure:
• Radial wheel runout
• Lateral wheel runout
Refer to "CHECKING THE FRONT WHEEL"
on page 4-12.
EAS30160
CHECKING THE REAR WHEEL DRIVE HUB
1. Check:
• Rear wheel drive hub "1"
Cracks/damage Replace.
• Rear wheel drive hub dampers "2"
Damage/wear Replace.
1
EAS30161
CHECKING AND REPLACING THE REAR
WHEEL SPROCKET
1. Check:
• Rear wheel sprocket
More than 1/4 tooth "a" wear Replace the
drive sprocket, the rear wheel sprocket and
the drive chain as a set.
Bent teeth Replace the drive sprocket, the
rear wheel sprocket and the drive chain as a
set.
2
2
2
b. Correct
1. Drive chain roller
2. Rear wheel sprocket
2. Replace:
• Rear wheel sprocket
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the rear wheel sprocket nuts and the
rear wheel sprocket.
b. Clean the rear wheel drive hub with a clean
cloth, especially the surfaces that contact the
sprocket.
c. Install the new rear wheel sprocket.
Rear wheel sprocket nut
80 Nm (8.0 m·kgf, 58 ft·lbf)
TIP
Tighten the rear wheel sprocket nuts in stages
and in a crisscross pattern.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS30163
ASSEMBLING THE REAR WHEEL
ECA21340
NOTICE
• Do not drop the wheel sensor rotor or sub-
ject it to shocks.
• If any solvent gets on the wheel sensor ro-
tor, wipe it off immediately.
1. Install:
• Wheel bearings
4-22
REAR WHEEL
New
Advertisement
Chapters
Table of Contents
Troubleshooting
