CDP-211/311
SERVICE MANUAL
Photo: CDP- 311 model
SPECIFICATIONS
Compact disc player
Laser
Semiconductor laser (\ = 780 nm)
Wavelength
780 ~ 790 nm
Frequency response
2 Hz to 20 kHz +0.5 dB
Signal-to-noise ratio
More than 100 dB
Dynamic range
More than 98 dB
Harmonic distortion
Less than 0.0045%
Channel separation
More than 95 dB
Outputs
LINE OUT (phono jacks)
Output level 2 V (at 50 kilohms)
Load impedance over10 kilohms
PHONES (stereo phone jack)
Output level max. 10 mW
Load impedance 32 ohms
General
Power requirements
AEP, Germany models :
220 — 230 V AC, 50/60 Hz
US, Canadian mods :
120 V, 60 Hz
UK, Australian models :
240 V AC, 50 Hz
For other countries:
110-120/220-240 V AC, adjustable
with the voltage selector, 50/60 Hz
Power consumption
10W
Dimensions (approx., including projections)
430 x 100 x 295 mm (w/h/d)
(17x 4x 11 5/e inches)
Mass (approx.)
3.2 kg (7 ibs 1 0z)
Model Name Using Similar Mechanism
| CDP -297/397
Tape Transport Mechanism Type
CDM14-5DB10
Optical Pickup Block Type
|
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
BU-5BD10
Remote commander (only for CDP-311 )
Remote control system
Infrared control
Power requirements
3 VDC with two R6 (size AA)
batteries
Dimensions (approx., including projections)
40 x 20 x 175 mm (w/h/d)
(1 5/e x "/16 x 7 inches)
Mass (approx.)
95 g (4 02)
Supplied accessories
Audio cord
(1) (2 phono plugs — 2 phono plugs)
Remote commander (only for CDP-31 1)
(1)
Sony SUM-3 (NS) batteries (only for CDP-311)
(2)
Plug adaptor (except for European, Canadian and Australian
models)
(1)
Design and specifications are subject to change without notice.
COMPACT DISC PLAYER
SONY.