Table of Contents
Advertisement
If you don't see any improvement after cleaning the print head up to 3 times, wait at least 12 hours
without printing. Then try cleaning the print head again. If quality still does not improve, contact Epson
support.
Parent topic:
Print Head Cleaning
If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the
print head.
Note: You cannot clean the print head if ink is expended, and may not be able to clean it when ink is low.
You must replace the ink pack first.
Cleaning the Print Head Using the Product Control Panel
Parent topic:
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the
4. Select Maintenance > Print Head Cleaning.
5. Select Start to clean the print head.
When the cleaning cycle is finished, you see a message on the LCD screen.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
6. Select Yes to print a nozzle check pattern and follow the on-screen instructions.
Parent topic:
Print Head Alignment
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Print Head Nozzle Check
Print Head Maintenance
home button, if necessary.
Print Head Cleaning
259
Advertisement
Table of Contents
