Table of Contents
Advertisement
DAILY USE
Protocol
Max Power
5.4 Software licences
The software in this product contains components that are based on free and open source
software. AEG acknowledges the contributions of the open software and robotics communities
to the development project.
To access the source code of these free and open source software components whose license
conditions require publishing, and to see their full copyright information and applicable license
terms, visit: http://aeg.opensoftwarerepository.com (folder GTM3).
5.5 Initial preheating
Preheat the empty oven before the first use.
Step 1
Remove all accessories and removable shelf supports from the oven.
Step 2
Set the maximum temperature for the function:
Let the oven operate for 1 h.
Step 3
Set the maximum temperature for the function:
Let the oven operate for 15 min.
The oven can emit an odour and smoke during preheating. Make sure that the room is ventila‐
ted.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 How to set: Heating functions
Step 1
Turn on the oven.
Step 2
Hold the knob. The display shows the default heating functions.
Step 3
Select the symbol of the heating function and press the knob to enter the submenu.
Step 4
Select the heating function and press the knob.
Step 5
Select:
The display shows the temperature settings.
14/40
. Press the knob.
IEEE 802.11b DSSS/802.11g/n OFDM
EIRP < 20 dBm (100 mW)
.
.
Advertisement
Table of Contents
