Table of Contents
Advertisement
INSTALLATION
The hob unit can be mounted in any
type of kitchen with a table surface
whose thickness is between 28mm and
40mm.
Clearance
There must be a free space of at least
55mm between the underside of the unit
and the top surface of any fixture below.
Fixing
Screw the fixing brackets out to such an
extent that they can be turned in under
the table top. Tighten the brackets on to
the table top with an ordinary
screwdriver.
CUT-OUT MEASUREMENTS
Minimum
distance to
waii:150 mm
Reinforcement
beams
One rectangular hole is sawn out for the
hob combination chosen.
The depth of the cut-out for any unit is: 490 mm.
Length of hole = sum of all units' externally measured length, less 20 mm.
Example:
Grill + cooker hood + two-burner ceramic-top electric hob + two-burner gas hob
290 +
145
290
290
20
995
Mounting Of Reinforcement Beams
A reinforcement Beam, with supporting flanges at each end, is included with each
two-burner unit.
For unit combinations, a reinforcement beam must be used between each unit. It is
not necessary to attach the reinforcement beam to the table surface, as it Is held in
place by a specially designed moulding, which is incorporated in the hob unit's
flanges
_ __
6
Advertisement
Table of Contents
