5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch
for 1 second to activate or
deactivate the hob.
The control bars come on after you activate
the hob and go off after you deactivate the
hob.
When the hob is deactivated you can only
see
.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• you do not place any cookware on the hob
for 50 seconds,
• you do not set the heat setting for 50
seconds after you place the cookware,
• you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth). When you hear
the acoustic signal, the hob deactivates.
Remove the object or clean the control
panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking zone
cool down before you use the hob again.
• you do not deactivate a cooking zone or
change the heat setting. After some time,
the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
1 - 2
3 - 4
5
6 - 9
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hours
5.3 Using the cooking zones
CAUTION!
Do not place hot cookware on the control
panel. There is a risk of damage to the
electronic parts.
Place the cookware in the centre of the
selected zone. Induction cooking zones adapt
to the dimension of the bottom of the
cookware automatically.
Once the pot is detected, the heat setting 0
comes on.
5.4 The heat setting
Touch the control bar at the desired heat
setting or move your finger along the control
bar to set or change the heat setting for a
cooking zone.
Once you place a pot on the cooking zone
and set the heat setting, it remains the same
for 50 seconds after you remove the pot. The
control bar blinks for the second half of that
time. If you place the pot on the cooking zone
again within this time, the heat setting
ENGLISH
9