Table of Contents
Advertisement
EBU18100
Start switch "
"
Push this switch to crank the engine with the start-
er.
ECB00050
NOTICE
See the starting instructions on page 6-1 prior
to starting the engine.
EBU18160
Light switch "
/
Set this switch to "
the taillight and the meter lighting. Set the switch
to "
" to turn on the high beams, the taillight and
the meter lighting. Set the switch to "OFF" to turn
off all the lights.
ECB00040
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time, oth-
erwise the battery may discharge to the point
that the starter motor will not operate properly.
If this should happen, remove the battery and
recharge it.
/OFF"
" to turn on the low beams,
EBU18170
Horn switch "
Press the switch to sound the horn.
EBU28510
Override switch "OVERRIDE"
1. Override switch "OVERRIDE"
Top speed is normally limited when operating in
differential gear lock. If conditions require more en-
gine power when riding forward, push and hold this
switch to override the differential gear lock speed
limiting function. (See page 4-7.) Releasing the
switch restores the speed limiting function.
While the override switch is pushed, the reverse in-
dicator light "REVERSE" will flash.
4-5
"
4
Advertisement
Table of Contents
Troubleshooting
