Table of Contents
Advertisement
2
1
1. Bolt
2. Battery holding plate
3. Negative battery lead (black)
4. Positive battery lead (red)
4. Pull the battery out of its compartment.
To charge the battery
Have a Yamaha dealer charge the battery as soon
as possible if it seems to have discharged. Keep in
mind that the battery tends to discharge more
quickly if the ATV is equipped with optional electri-
cal accessories.
3
4
ECB00930
NOTICE
To charge a VRLA (Valve Regulated Lead Acid)
battery, a special (constant-voltage) battery
charger is required. Using a conventional bat-
tery charger will damage the battery. If you do
not have access to a constant-voltage battery
charger, have a Yamaha dealer charge your
battery.
To store the battery
G
If the ATV will not be used for more than one
month, remove the battery, fully charge it, and
then place it in a cool, dry place.
G
If the battery will be stored for more than two
months, check it at least once a month and fully
charge it if necessary.
To install the battery
TIP
Be sure the battery is fully charged.
1. Place the battery in its compartment.
2. Connect the positive battery lead first, then
connect the negative battery lead by installing
their bolt.
8-42
8
Advertisement
Table of Contents
Troubleshooting
