Table of Contents
Advertisement
MULTI-FUNCTION DISPLAY
Initial setting
value
709 mm
(700 mm)
1 - 16
Changing tripmeter A/B (TRIP A/B)
1. Push the "SLCT2" button to change the
tripmeter display. The display will change
in the following order:
TRIP A → TRIP B → TRIP A.
NOTE:
To reset the digits, select the tripmeter
involved and push the "RST" button for 2 sec-
onds or more.
Setting the tire diameter
NOTE:
The outer diameter of a tire varies with tire
wear, tire pressure, and course condition.
If the outer diameter of a tire varies with tire
wear or tire pressure, it can be corrected in the
following manner.
NOTE:
The initial value is preset with approximately
700 mm as 100%.
• If the outer diameter of a tire is larger than
the initial value → Provide a larger set value.
• If the outer diameter of a tire is smaller than
the initial value → Provide a smaller set
value.
1. Compute the difference in outer diameter
from the initial value for the front tire.
Example) If the outer diameter of the tire is
709 mm, which is larger than initial value;
709 mm/700 mm × 100(%) = 101.3(%)
Range capable of setting: 65.0 ~ 115.0%
GEN
INFO
Advertisement
Table of Contents
