Table of Contents
Advertisement
BATTERY REPLACEMENT/FUSE INSPECTION
6. Install:
• Battery
• Battery band
7. Connect:
• Battery leads
(to the battery terminals)
CAUTION:
First, connect the positive lead 1, then the
negative lead 2.
8. Check:
• Battery terminals
Dirt → Clean with a wire brush.
Loose connection → Connect properly.
9. Lubricate:
• Battery terminal
Recommended lubricant:
Lithium soap base grease
10. Install:
• Seat
BATTERY REPLACEMENT
1. Replace:
• Battery
CAUTION:
This battery is for YAMAHA WR250F.
After filling the battery with electrolyte,
either charge it for at least 3 hours at the
amperage specified on the battery or let it
sit for at least 15 hours before using it.
EAS00181
FUSE INSPECTION
CAUTION:
To avoid a short circuit, always set the
main switch to "OFF" when checking or
replacing a fuse.
1. Remove:
• Seat
• Fuse cover
3 - 63
INSP
ADJ
Advertisement
Table of Contents
