Table of Contents
Advertisement
Available languages
Available languages
en-us_main.book.book Page 45 Tuesday, December 12, 2023 12:59 PM
Settings and Extra Functions
Your dryer includes several additional cycle
settings to customize cycles to meet your
individual needs.
Select the desired settings after selecting the
desired cycle.
NOTE
• To protect your garments, not every option is
available with every cycle.
• A chime will sound twice and the LED will not
light up if the selected setting is not allowed for
the selected cycle.
Steam
Use this function to add steam to a cycle. This
function helps reduce wrinkles and odor in fabrics.
1
Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
2
Use the cycle modifier buttons to customize
the settings for that cycle.
3
Press the Steam button.
NOTE
• When this function is selected, the Damp and
Less dry levels cannot be selected.
4
Press the Start/Pause button to start the
cycle.
WARNING
• Do not touch the door during steam cycles. The
door surface can become very hot.
• Do not attempt to reach into the dryer during a
steam cycle. Steam can cause severe burns.
NOTE
• Steam may not be clearly visible during steam
cycles. This is normal.
• Do not use steam with delicate fabrics such as
wool, silk, or easily discolored fabrics.
• When the filter/duct is clogged, this option may
not have optimal results.
• When this function is operating, the drum will
stop to allow steam to stay in the drum.
Energy Saver
This option helps to reduce the energy
consumption of the Normal cycle, depending on
the load size. When the Energy Saver option is
selected, the cycle begins with an air dry section
and the drying time is increased.
NOTE
• The Energy Saver option is turned on by default
in the Normal cycle.
• If you change the Energy Saver option, the new
setting is maintained the next time you use the
Normal cycle. To turn the setting on or off, press
the Energy Saver button.
Wrinkle Care
Selecting this option will tumble the load
periodically for up to 3 hours after the selected
cycle, or until the door is opened. This is helpful in
preventing wrinkles when you are unable to
remove items from the dryer immediately.
Press the Wrinkle Care button before you start a
dry cycle.
NOTE
• When the option is turned on, only the Power
button works after the dry cycle ends.
• To select the option after starting a cycle, pause
the cycle, set the option, and press Start/Pause.
• Always turn off the appliance before unloading
the clothes.
Settings
1
Press the Settings button.
2
Select the desired settings and adjust them
as needed.
3
Press the
(OK) button.
8
OPERATION
45
- Quick Links:
- Control Panel
Hide quick links:
Advertisement
Table of Contents
