Advertisement
Quick Links
SERVICE MANUAL
INTEGRATED
STEREO AMPLIFIER
e Sanur
NOTE:
The photo on the cover shows the unit with a "SILVER"
front panel. The ''BLUE" version is identical in all respects.
NOTE:
The below
mentioned
specifications are mainly based on the
IHF measurements standard.
They
can
therefore
riot be compared
directly with
specifi-
se SANYO
DCA M15
(EUROPE)
SPECIFICATIONS
cations based on the DIN standard or other standards.
POWER AMPLIFIER SECTION
Minimum
RMS sine wave power
per channel, no more than
stated distortion and with
8-ohm load at 1 kHz (DIN}
Total Harmonic Distortion
|.M. Distortion
Speaker Damping
PREAMPLIFIER SECTION
Frequency Response
Phono (RIAA)
Aux (£1.0 dB)
Microphone (+3 dB)
Input Sensitivity/lmpedance
Phono
Tuner
Aux
Tape
Microphone
Phono Max. Input Capability
45 Watts
0.09 %
0.09 %
> 25
+0.5dB
20 Hz — 20 kHz
70 Hz — 4.5 kHz
2.5 mV/50 kohms
150 mV/50 kohms
150 mV/50 kohms
150 mV/50 kohms
1.5 mV/7 kohms
120 mV
Graphic Equalizer
50 Hz
+12 dB
250 Hz
+12 dB
1 kHz
+12 dB
4.5 kHz
+12 dB
15 kHz
+12 dB
Hum and Noise (IHF Short Circuit,
A Network)
Phono
72 dB
Tuner
80 dB
Aux
80 dB
Tape
80 dB
Microphone
64 dB
GENERAL
Power Requirements
AC: 110/220V, 50 Hz
Power Consumption
296 W
Dimensions (W x H x D)
335 x 108 x 257 mm
Weight (approx.)
5 kg
—Specifications are subject to change without notice.—
WM-9144
Advertisement
