Table of Contents
Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
Keep in dry area
protect from rain
1.
SAFETY
ELECTRICAL SAFETY
WARNING! It is the user's responsibility to check the following:
‰
Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all
9
electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical
products.
1.1.
Electrical safety information. It is important that the following information is read and understood:
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
9
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
9
Important: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the
correct fuse.
DO NOT pull or carry the appliance by the power cable.
8
DO NOT pull the plug from the socket by the cable.
8
DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or is replaced immediately by a
8
qualified electrician.
If the cable or plug is damaged during use, switch off the electricity supply and remove from use.
Ensure that repairs are carried out by a qualified electrician.
WARNING! Modern vehicles contain extensive electronic systems.
‰
You are required to check with the vehicle Manufacturer, for any specific instructions regarding the use of this type of equipment on
each vehicle. No liability will be accepted for damage / injury, where this product is not used in accordance with all instructions.
▲
DANGER! BE AWARE, LEAD-ACID BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS
REASON, IT IS VERY IMPORTANT TO READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY EACH TIME YOU USE THE CHARGING
EQUIPMENT. Follow these instructions and those published by the battery manufacturer and the maker of any equipment you intend to
use in the vicinity of the battery. Remember to review warning marks on all products and on engines.
1.2.
PERSONAL PRECAUTIONS
When working with or near a lead-acid battery ensure there is another person within hearing range and close enough to come to your
9
aid, should a problem arise.
Wear safety eye protection and protective clothing. Avoid touching eyes while working near battery.
9
Have fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
9
Wash immediately with soap and water if battery acid contacts skin or clothing. If acid enters eye, flush eye immediately with cool,
9
clean running water for at least 15 minutes and seek immediate medical attention.
Remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit
9
current high enough to weld a ring or the like to metal, which may cause severe burns.
Ensure hands and clothing, including belts, are clear of fan blades and other moving or hot parts of the engine. Remove ties and contain
9
long hair.
DO NOT smoke or allow a spark or flame in the vicinity of the battery or the engine.
8
1.3.
GENERAL SAFETY INSTRUCTIONS
Familiarise yourself with the applications, limitations and potential hazards relating to the starter/charger. Also refer to the vehicle
9
manufacturer's handbook. IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN.
Ensure the starter/charger is in good order and condition before use. If in any doubt, do not use the unit and contact an electrician.
9
Only use genuine parts. To use unapproved parts may be dangerous and will invalidate your warranty.
9
© Jack Sealey Limited
ELECTRONIC STARTER/CHARGER/MAINTAINER
650/100A 12/24V
MODEL NO:
Wear protective
Electrical
gloves
shock
hazard
Original Language Version
ECS650.V2
Warning
Warning:
corrosive
explosive
material
substance
Use in well
Keep away
ventilated areas
from sources of
ignition
ECS650.V2 Issue 2 (3) 16/01/24
Advertisement
Table of Contents
Related Manuals for Sealey ECS650.V2
Summary of Contents for Sealey ECS650.V2
- Page 1 ECS650.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
-
Page 2: Specification
4.5.2. Locate cable using cable screw washer and nut, note which way up cable needs to be. Screw on cable clamp tightly. 4.5.3. Screw up cable screw tightly. Original Language Version ECS650.V2 Issue 2 (3) 16/01/24 © Jack Sealey Limited... -
Page 3: Control Panel
4.5.4. Push outer protection pieces onto the ends of the clamp. 4.5.5. Slide insulating handles up to meet the outer protection pieces. 4.5.6. Repeat for all clamps. For reference. fig.1 Supplied assembled. fig.2 Data Plate 5. CONTROL PANEL Original Language Version ECS650.V2 Issue 2 (3) 16/01/24 © Jack Sealey Limited... -
Page 4: Operating Modes
In this mode no error messages are generated during the charging cycle. At the end of the cycle a message is displayed to indicate whether or not the battery has been recovered on the basis of the current absorption. Original Language Version ECS650.V2 Issue 2 (3) 16/01/24 © Jack Sealey Limited... -
Page 5: Charging Mode
LED the battery. again REVERSE (see section: 7.2. Operating the Charger). Err08 Excessively high output current Current exceeds maximum Reduce output current when in manual mode. limit. Original Language Version ECS650.V2 Issue 2 (3) 16/01/24 © Jack Sealey Limited... -
Page 6: Operation
8.5.5.4. During the start-up phase, the battery charger will keep the voltage and current under control. 8.5.6. When the engine starts, switch off the charger and remove the clamps from the battery in the order as in section 7.4. Above. Original Language Version ECS650.V2 Issue 2 (3) 16/01/24 © Jack Sealey Limited... -
Page 7: Maintenance
IMPORTANT: No Liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 24 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk...