Advertisement
Available languages
Available languages
Package Contents
The package contains:
1 Angle grinder
1 Cutting Guard
1 Grinding Guard
1 Side handle
1 Flange set
1 Hex wrench
1 Instruction manual
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection.
Always operate with two hands.
Do not use the guard for cut‑off operations.
Date Code Position (Fig. B)
The production date code
10
by a 2‑digit week and is extended by a 2‑digit factory code.
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Spindle lock button
1
Spindle
2
Side handle
3
Backing flange
4
Locking flange
5
Guard
6
Slider switch
7
Intended Use
These heavy‑duty angle grinders have been designed
for professional grinding, sanding, wire brushing and
cutting applications.
DO nOT use grinding wheels other than centre depressed
wheels and flap discs.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
consists of a 4‑digit year followed
DANGER: Do not use for wood cutting or woodcarving.
Do not use toothed blades of any kind. Serious injury
can result.
These heavy‑duty angle grinders are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Soft Start Feature
The soft start feature allows a slow speed build‑up to avoid an
initial jerk when starting. This feature is particularly useful when
working in confined spaces.
No‑Volt
The No‑volt function stops the grinder restarting without the
switch being cycled if there is a break in the power supply.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Attaching Side Handle (Fig. A)
WARNING: Before using the tool, check that the handle is
tightened securely.
Screw the side handle
3
tightly into one of the holes on either
side of the gear case. The side handle should always be used to
maintain control of the tool at all times.
Guards
CAUTION: When using a Type A (cut-off) wheel guard
for facial grinding, the wheel guard may interfere with
the workpiece causing poor control.
CAUTION: When using a Type B (grinding) wheel guard
for cutting-off operations with bonded abrasive wheels,
there is an increased risk of exposure to emitted sparks and
particles, as well as exposure to wheel fragments in the
event of wheel burst.
CAUTION: When using a Type A (cut-off), Type B (grinding)
wheel guard for cutting-off and facial operations in
concrete or masonry, there is an increased risk of exposure
to dust and loss of control resulting in kickback.
CAUTION: When using a Type A (cut-off), Type B
(grinding) wheel guard with a wheel-type wire brush
with a thickness greater than the maximum thickness as
specified in Technical Data, the wires may catch on the
guard leading to breaking of wires.
EnGLIsh
39
Advertisement
