Table of Contents
Advertisement
2. Connect the positive battery lead first, then
connect the negative battery lead by installing
their bolt. NOTICE: When installing the bat-
tery, the main switch must be off, and the
positive lead must be connected before
the negative lead.
1
2
1. Positive battery lead (red)
2. Negative battery lead (black)
3. Hook the battery holding plate onto the bat-
tery box.
[ECB01111]
1
1. Battery holding plate
2. Battery box
4. Install the battery holding plate with the bat-
tery cover by installing the bolts and the quick
fastener screws.
5. Install the seat. (See page 4-11.)
TIP
Make sure the positive and negative battery
leads are installed as shown.
Fully charge the battery before installing it.
8-49
2
8
Advertisement
Table of Contents
Troubleshooting
