Table of Contents
Advertisement
Available languages
Available languages
4 Installation
Read the "Safety Instructions" first!
Before consulting the nearest Authorized
Service for installing the drying machine, see
the information in the user guide and make sure
the electric and water utilities are as required. If
not, call an electrician and plumber to arrange
the utilities as necessary.
It is customer's responsibility to
prepare the location the drying
machine shall be placed on and
also have power and waste water
installation prepared.
Check for any damage on the
drying machine before installing it. If
drying machine is damaged, do not
get it installed. Damaged products
cause a risk for your safety.
Wait 12 hours prior to operating the
drying machine.
The product includes a cooling
agent and if the product is operated
right after its transported, it may
NOTICE
get damaged. After each time the
product is moved, it shall be left to
rest for 12 hours.
4.1 Right place for installation
•
Install the drying machine on a flat and
stable surface.
•
Dryer machine is heavy. Do not move it by
yourself.
•
Operate the drying machine in an
environment free of dust with good
ventilation.
•
The gap between the drying machine and
the floor shall not be reduced via materials
such as rugs, pieces of wood and bands.
•
Do not block the ventilation grilles of the
drying machine.
•
There shall not be doors that can be
locked, sliding doors or hinged doors near
the installation environment of the drying
machine that may block the loading door
to be opened.
Dryer / User manual
•
Once the drying machine is installed,
the connections must stay stable. After
placing the drying machine, ensure that
the back wall does not come in contact
with any extrusion (a water tap, electrical
outlet etc.).
•
Place the drying machine with at least 1
cm space between the product and the
furniture edges.
•
Your drying machine is suitable to be
operated between +5°C to +35°C. If
operated outside this temperature range,
your drying machine's operation may be
compromised and get damaged.
•
The drying machine shall not be placed
with the back side against a wall.
B
Do not place the drying machine on
its power cord.
* Ignore following warning if your
product's system does not contains
R290.
Dryer contains R290 refrigerant.*
R290 is an environment-friendly, but
flammable refrigerant.*
Ensure that the air inlet of the dryer
is open and it is well-ventilated.*
Keep potential flame sources away
from the dryer.*
4.2 Removing the
shipping safety group
Do not leave an accessory or any
parts of the shipping safety group
NOTICE
inside the drum.
Remove the shipping
safety group prior to
first use the product.
15
Advertisement
Chapters
Table of Contents
