Advertisement
Quick Links
1. Disassembly Procedures:
S1
Turn off power..
Unplug external cables(power cable and video
S2
cable) from the monitor.
Remove stand from the product.(Press the stand
S3
release button, lift the stand up and away from the
monitor)
Use a Philips-head screwdriver to remove 4pcs
S4
screws for unlocking mechanisms. Remove DP cap.
(No.1~4 screw size=M4x11; Torque=11
1kgfxcm)
±
2
3
1
4
Wedge your fingers between rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S5
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
Lift the rear cover up carefully. Disconnect the
joystick key cable from the connector of the main
S6
board, and then remove the rear cover and put it
aside for later disassembling.
Use a Philips-head screwdriver to remove 3pcs screw
for unlocking the joystick board, and then tear off all
S7
the tapes on the back of the cable and release the
joystick cable from the rear cover.
(No.1~3 screw size=M2x3.3, Torque=1
DELL P2724DEB
1
2
3
0.2kgfxcm)
±
1
2
3
1
2
3
1
Advertisement
Related Manuals for Dell P2724DEB
Summary of Contents for Dell P2724DEB
- Page 1 DELL P2724DEB 1. Disassembly Procedures: Wedge your fingers between rear cover and the middle bezel on the corners of the top side of the Turn off power.. monitor to release the rear cover, then use one hand to press the middle bezel, the other hand to pull up carefully the rear cover in order of arrow preference for unlocking mechanisms of rear cover.
- Page 2 DELL P2724DEB Tear off 1pcs aluminum foil for releasing the USB cable. Use a Philips-head screwdriver to remove 1pcs screw for unlocking the USB unit, then disconnect the two USB cables away from the connectors of interface board. Release the USB board away from the hook of the middle frame.
- Page 3 DELL P2724DEB Disconnect the LVDS cables away from the connectors Lift up the middle bezel away from the pane module, of the panel module, then lift up and take away the then put it on a cushion foam for later disassembling.
- Page 4 DELL P2724DEB Remove the power board and interface board from bracket chassis module carefully, and then disconnect all of the cables. Remove the Mylar tape from the hooks of the bracket chassis. Use a Philips-head screwdriver to remove 8pcs screws for interface board and power board with the bracket chassis module.
- Page 5 DELL P2724DEB S24-4 Take out bulk cap. pin solder with soldering iron and Remove electrolyte capacitors (red mark) from absorber. printed circuit boards. S24-1 Cut the glue between bulk cap. and PCB with a knife. S24-5 Lift the bulk cap. up and away from the PCB.
- Page 6 DELL P2724DEB 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury containing components...