Table of Contents
Advertisement
Available languages
Available languages
Oven emits steam when it is in use.
It is normal that steam escapes during operation. This is not a fault.
Water drops occur during cooking
The vapour that arises during cooking can condense and form water droplets when it hits cold surfaces of the
product. This is not a fault.
Product does not operate.
The mains fuse is defective or has tripped.
Check fuses in the fuse box. If necessary, replace or
reset them.
Product is not plugged into the (grounded) socket.
Oven light does not work.
Oven lamp is defective.
Power is cut.
Check if there is power. Check the fuses in the fuse
box. If necessary, replace or reset the fuses.
Oven does not heat.
Function and/or Temperature are not set.
Set the function and the temperature with the Function
and/or Temperature knob/key.
Power is cut.
Check if there is power. Check the fuses in the fuse
box. If necessary, replace or reset the fuses.
There is no gas.
Main gas valve is closed.
Gas pipe is bent.
There is no ignition spark.
No current.
Burners are not burning properly or at all.
Burners are dirty.
Burners are wet.
Open gas valve.
nstall gas pipe properly.
Check fuses in the fuse box.
Clean burner components.
Dry the burner components.
Burner cap is not mounted safely.
Mount the burner cap properly.
Gas valve is closed.
Open gas valve.
Gas cylinder is empty (when using LPG).
Replace gas cylinder.
‚
Consult the Authorised Service Agent or the dealer where you have purchased the product if you can
{not remedy the trouble although you have implemented the instructions in this section. Never attempt
Gio repair a defective product yourself.
Advertisement
Table of Contents
