Cisco Firepower 9300 Hardware Installation Manual page 61

Hide thumbs Also See for Firepower 9300:

Table of Contents

Rack-Mount and Ground the Chassis

Step 2

Insert the stripped end of the grounding cable into the open end of the grounding lug.

Figure 37: Insert the Cable into the Grounding Lug

Step 3

Use the crimping tool to secure the grounding cable in the grounding lug.

Step 4

Remove the adhesive label from the grounding pad on the chassis.

Step 5

Place the grounding lug against the grounding pad so that there is solid metal-to-metal contact, and insert the two screws

with washers through the holes in the grounding lug and into the grounding pad.

Figure 38: Attach the Grounding Lug

Step 6

Make sure that the lug and cable do not interfere with other equipment.

Step 7

Prepare the other end of the grounding cable and connect it to an appropriate grounding point in your site to ensure

adequate earth ground.

Cisco Firepower 9300 Hardware Installation Guide

Ground the Chassis

Table of Contents