Safety - Husqvarna 325iLK Operator's Manual
Hide thumbs
Also See for 325iLK:
- Operator's manual (384 pages) ,
- Workshop manual (28 pages) ,
- Operator's manual (24 pages)
Table of Contents
Advertisement
Available languages
Available languages
must be deposited at an appropriate
recycling facility.
(Fig. 14)
The operator must ensure that no people
or animals come closer than 15 metres.
When several operators are working at
the same site a safety distance of at
least 15 metres must be in effect. The
attachment can forcibly throw objects that
can bounce back. This can result in
serious eye injuries if the recommended
safety equipment is not used.
(Fig. 15)
Do not use in rain.
(Fig. 16)
Keep all parts of your body away from the
hot surfaces.
(Fig. 17)
Noise emission to the environment label
as per EU (also including New South
Wales legislation) and UK directives
and regulations. The guaranteed sound
power level of the product is specified in
Technical data on page 17 and on the
label.
yyyywwxxxx
The rating plate shows the serial num-
ber. yyyy is the production year, ww is
the production week and xxxx is the
sequential number.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General power tool safety warnings
WARNING:
instructions, illustrations and specifications
provided with this power tool. Failure to
8
Used if there is a risk of
Used if there is a risk of
Read all safety warnings,
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Manufacturer
Husqvarna AB
Drottninggatan 2, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500
Product damage
We are not responsible for damages to our product if:
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
Safety
follow all instructions listed below may result
in electric shock, fire and/or serious injury.
•
Save all warnings and instructions for future
reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
•
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
•
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
•
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
785 - 007 - 10.10.2023
Advertisement
Chapters
Table of Contents
