Table of Contents
Advertisement
LEDs
LED
STS (Status)
ACT (Active)
GPS
SYNC
Fabric Module LEDs
The fabric modules are located behind the fan trays.
Color
Status
This module is operational with no issues.
Green
Flashing green
The auto or manual FPD upgrade in-progress.
Flashing
The module has minor alarm.
amber
Flashing red
The module has active major or critical alarms.
Amber
The module is in one of the following states:
• Power cycle
• Reload or reimage
• Shutdown
Red
BIOS boot failure. Also, the ATTN LED remains blue.
Off
The module is not enabled.
Green
The module is in the Active state.
Off
The module is in the Standby state.
Green
The GPS interface is provisioned and frequency, time of day and phase
inputs are all operating correctly.
Off
The GPS interface is not provisioned, or the GPS inputs are not working
correctly.
The frequency, time, and phase are synchronized to an external
Green
interface. The external interface could be:
• BITS
• GPS
• Recovered RX Clock
Amber
The system is running in holdover or free-run mode and it is not
synchronized to an external interface.
Off
The centralized frequency or time and phase distribution is not enabled.
Cisco Nexus 9808 NX-OS Mode Switch Hardware Installation Guide
Fabric Module LEDs
73
Advertisement
Table of Contents
