Softkey Buttons - Cisco SPA 508G Quick Start Manual
Hide thumbs
Also See for SPA 508G:
- User manual (8 pages) ,
- Administration manual (311 pages) ,
- Quick start manual (6 pages)
Table of Contents
Advertisement
#
Phone Feature
10
Mute button
11
Headset button
12
Volume button
13
Speaker button
14
Keypad
➌
Softkey Buttons
Press the right arrow on the navigation button to view additional softkey buttons. Below is a partial listing of
softkey buttons that are available on your phone.
Phone Feature
<< or >>
Move left or right through an entry without deleting characters.
add
Add an entry
apps
Push to turn the headset on or off. When the headset is on, the button glows green.
Performs a blind call transfer (transferring a call without speaking to the party to whom you are trans-
bx fer
ferring the call).
Puts a call on hold at a designated "park" number. The call is parked on the line until you unpark it
Callpark
or the caller disconnects. Must be configured by your phone system administrator.
Cancel
Cancels any changes you have made (press cancel before pressing Ok or save).
cfwd
Forwards all calls coming to your phone to a specified number.
-cfwd
Clears Call Forward.
clear
Clears the entry.
conf
Initiates a conference call.
confLx
Brings active lines on the phone together into a conference call.
confserv
Dials into the conference bridge.
delChr
Deletes the last number or letter.
delete
Deletes an entire item (for example, a number from the Call History list).
dial
Dials a number.
dir
Do Not Disturb; prevents incoming calls from ringing your phone.
dnd
Do Not Disturb; prevents incoming calls from ringing your phone.
-dnd
Clears Do Not Disturb.
edit
Opens an item so that you can edit numbers or letters, or enable or disable a feature.
editCall
Ends the call in progress.
exit
Closes a menu.
hold
Places a call on hold.
intercom
Allows you to automatically connect to a remote extension.
join
Joins two calls into a conference call and drops you from the call.
Press to mute or unmute the phone. When phone is muted, the button glows red. A flashing
mute button indicates the network connection cannot be found.
Push to turn the headset on or off. When the headset is on, the button glows green.
Press + to increase the volume and - to lower the volume of the handset, headset, speaker
(when the handset is off the phone), or ringer volume (when the handset is on the phone).
Push to turn the speaker on or off. When the speaker is on, the button glows green.
Use to dial phone numbers, enter letters and choose menu items.
Discription
Discription
myDatavo Model SPA 504G Quick Start User Guide
|
3
Advertisement
Table of Contents
