Table of Contents
Advertisement
Chapter 2 Preparations
7.
Take out a rear blank from the option kit, fit the blank cover from the upper direction and fix it with two
screws.
8.
Adjust the position of the riser card edge of the tertiary riser card to the position of the connector, and push
it in place from above.
Raise the 2 screw handles located on the upper part of the riser card and push it downwards while turning
it 180° to the right to fix the riser card in place. Then, return the screw handles to their original positions.
9.
See Chapter 2 (1.34 Installing Top Cover) to attach the top cover of the server.
10. Please see Chapter 2 (2 Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.
Removal
The procedure for removal is the reverse of installation.
Re-attach the blank cover if you operate without it attached.
98
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server without implementing any of
component or blank on all of drive bays and device bays.
Important
Re-attach the blank cover removed to maintain the internal cooling.
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
