Table of Contents
Advertisement
Chapter 2 Preparations
1.21
VMware ESXi USB flash memory for installation
(N8106-016/017/020)
VMware ESXi USB flash memory for installation (N8106-016/017/020) can be connected to USB 3.0 connector
inside the device.
Three types of USB flash memory are prepared.
①
N8106-016 2x8GB microSD card installing kit (USB)
Two microSDs able to install and boot VMware ESXi and USB conversion kit
N8106-017 8GB USB memory
②
USB flash memory able to install and boot VMware ESXi
N8106-020 2x32GB microSD card installing kit (USB)
③
Two microSDs able to install and boot VMware ESXi and USB conversion kit
Notes
N8106-016 2x8GB microSD card installing kit (USB) and N8106-020 2x32GB microSD card installing
kit (USB) are equipped with RAID1 function.
The function cannot be installed with M.2 SATA SSD.
This product does not include an install media of ESXi and the license.
Installation of USB flash memory N8106-016/017/020
When installing the components, follow the steps below.
1.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
Confirm the position of USB 3.0 connector inside.
136
Note
In order to prevent the damage for the electronic parts, start the installation of
system after providing proper anti-static treatment. If a proper earth is not
provided, electrostatic discharge may occur.
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
