Advertisement
15
Insert the waste ink tube into the holder as shown and then close
the clip.
16
Insert the waste ink bottle into the waste ink bottle holder. Then, place
the caution label for your language over the English label, if necessary.
17
Connect the power cord to the back of the printer and plug the other
end into an outlet. (Do not connect the printer to your computer yet.)
Turn On and Configure
1
Press the
power button on the control panel to turn on the printer.
2
Follow the on-screen instructions to select the language, date and time,
and measurement settings on the touchscreen.
3
Select the printer's ink mode from the touchscreen.
4
Open the ink covers.
5
Apply the ink labels for the selected ink mode as shown.
Note:
Only use label set 2 if the printer will be using High speed color mode.
Install Ink Supply Units (Ink Packs)
Caution:
Keep the ink packs out of the reach of children and do not drink the ink.
1
Pull one of the ink trays out of the printer.
2
Insert the ink pack into the tray and push it down as shown.
Note:
Make sure the ink pack fits onto the pegs and is aligned with the top of
the tray.
3
While the ink pack is in the tray, carefully shake it by tilting it up and
down at about a 60 degree angle as shown. Shake white ink packs about
25 times and shake other color ink packs 5 times.
4
Match the color on the ink pack label with the color slot on the printer
and then use both hands to insert the ink tray into the printer.
Note:
The ink packs are keyed to fit into the correct color slot. If you cannot
insert the ink tray all the way, do not force it. Make sure the ink pack color
matches the color slot on the printer.
5
Repeat steps 1 to 4 to install the other ink packs. Close the ink covers
after all of the ink packs have been installed.
6
Follow the instructions on the touchscreen to load the ink charging
unit, if necessary, and to begin ink charging. Ink charging takes about
35 minutes and you see a message on the touchscreen when it is
complete.
Caution:
Do not turn off the printer, open any covers, or try to perform any
other operations while the printer is charging or you'll waste ink.
Note:
•
If you selected White ink mode or High speed color mode, use a glove
to load the ink charging unit. After use, see the online User's Guide for
information on how to properly dispose of these items.
•
Make sure all of the ink trays are inserted in the product; otherwise
printing is not possible.
Advertisement
