Table of Contents
Advertisement
Phone Adapter with Router
Action
Command
(press these
keys on the
telephone)
Set the Mode
201
Enable/Disable WAN
7932
Access to the
Web-based Utility
Manual Reboot
732668
Factory Reset
73738
20
Interactive Voice Response Menu
Choices
Press 0 to select the
router/NAT mode.
Press 1 to select the
bridge/switch mode.
Press 1 to enable.
Press 0 to disable.
Press 1 to confirm.
Press * (star) to cancel.
Description
If the Phone Adapter acts as the router for
your network, use the router/NAT mode.
If your network already has a router, use the
bridge/switch mode.
Use this setting to enable or disable WAN
access to the Web-based Utility. (This Utility
lets you configure the Phone Adapter.)
After you hear, "Option successful," hang up
the phone. The Phone Adapter will
automatically reboot.
If necessary, enter the password. The Phone
Adapter will request confirmation; enter 1 to
confirm. You will hear, "Option successful."
Hang up the phone. The Phone Adapter will
reboot, and all settings will be reset to their
factory default settings.
NOTE: This feature may be
protected by a password
available only from your ITSP.
If you need to enter a password,
refer to the following section,
"Entering a Password."
Chapter 5: Using the Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Advertisement
Table of Contents
