Husqvarna LE 322R - Pedestrian-Controlled Rotary Battery Lawn Mower Manual Husqvarna

Also See for LE 322R:

Operator's manual (80 pages)

Table of Contents

Contents

1 Product description
2 Intended use
3 Product overview
4 Symbols on the product
- 4.1 Warning labels
5 Safety
6 Assembly
- 6.1 To assemble the grass catcher
7 Operation
8 Maintenance
9 Troubleshooting
10 Transportation, storage and disposal
11 Technical data
- 11.1 Support / Help
12 Documents / Resources
- 12.1 References
- 12.2 Download manual

Husqvarna LE 322R - Pedestrian-Controlled Rotary Battery Lawn Mower Manual Husqvarna

Product description

The product is a pedestrian-controlled rotary lawn mower. The grass is collected in a grass catcher. Remove the grass catcher to get rear discharge of the grass or attach a mulch blade to cut the grass into fertilizer.

Intended use

Use the product to cut grass. Do not use the product for other tasks.

Product overview

Control panel
Motor brake handle
Grass catcher
Rear cover
Battery cover
Cutting height control
Handle release button
ON/OFF button
Battery charge indicator
Speed adjustment control
Drive control button
Operator's manual
Battery charger, included in the kit only
Battery 2X, included in the kit only
Discharge chute
Mulch plug
Blade start/stop button
Cut mode button
Error LED
High temperature indicator
Locked blade indicator

Symbols on the product

	This product can be dangerous and cause serious injury or death to the operator or others. Be careful and use the product correctly.
	Please read the operator's manual carefully and make sure that you understand the instructions before use.
	Keep persons and animals at a safe distance from the work area.
	Use approved hearing protection.
	Look out for thrown objects and ricochets.
	Keep hands and feet away from the rotating blade.
	Be careful when you operate the product rearward. Look behind and down for small children, animals or other risks that can cause you to fall.
	To operate the product on a slope can be dangerous.
	Keep hands and feet away from rotating parts.
	Do not expose to rain
	Release motor brake handle to stop.
	Slow
	Fast
	Scannable code.
	Cut mode.
	Mode 1: Sensing.
	Mode 2: Mulching / High quality.
	Mode 3: Max power.

warning Note: Other symbols/decals on the product refer to certification requirements for some markets.

Warning labels

AVOID SERIOUS INJURY OR DEATH

Read the operator's manual. Go across slopes, not up and down. Do not mow when children or others are around.
Look down and behind before and while moving. Remove objects that could be thrown by the blade.
Keep safety devices (guards, shields, switches, etc.) in place and working.
To reduce risk of electric shock, do not expose unit to water or operate unit on wet ground.
Remove the batteries before opening, cleaning or changing accessories.
To reduce the risk of injury, do not operate without guards in place.
To reduce the risk of injury, inspect catcher assembly frequently and replace with recommended replacement if there are signs of wear or deterioration. Keep hands and feet away — rotating blade hazard. Keep bystanders and children away.
Remove battery pack when not in use.
For use only with Husqvarna BLi22 or BLi30 battery.

Safety

Safety definitions

Warnings, cautions and notes are used to point out specially important parts of the manual.

Used if there is a risk of injury or death for the operator or bystanders if the instructions in the manual are not obeyed.

Used if there is a risk of damage to the product, other materials or the adjacent area if the instructions in the manual are not obeyed.

warning Note: Used to give more information that is necessary in a given situation.

Safety instructions

When using electric lawn mowers, basic safety precautions should always be followed to prevent electrical shock and personal injury, including the following:

Read all instructions.
Avoid dangerous environments. Do not operate the product in damp or wet locations.
Do not operate the product in the rain.
Keep children away. All visitors should be kept at a safe distance from the work area.
Dress properly. Do not wear loose clothing or jewelry than can be caught in moving parts. Use rubber gloves and footwear when working outdoors.
Use safety glasses. Always use a face mask or dust mask if operation is dusty.
Do not use the product for any job except that for which it is intended.
Do not force the product. It will do the job better and safer at the rate for which it was designed.
Do not overreach. Keep proper footing and balance at all times.
Stay alert. Watch what you are doing. Use common sense. Do not operate the product when you are tired.
When not in use, the product should be stored in an indoor dry and locked-up place out of reach of children.
Maintain the product with care. Keep the cutting edges sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease.
Keep guards in place and in working order.
Keep blades sharp.
Keep hands and feet away from cutting area.
Objects struck by the lawn mower blade can cause severe injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to each mowing.
If any foreign object is hit or if vibrations occur, obey these instructions: Switch off the motor and remove the battery. Inspect the product for damage. Repair any damage or contact an authorized service agent.
Use identical replacement blades only.
The product can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.
Keep in mind that the operator is responsible for accidents or hazards occurring to other people or their property.
The product must be kept clean. Signs and stickers must be fully legible.
It is not possible to cover every conceivable situation you can face. Always exercise care and use your common sense. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your dealer, service agent or an experienced user. Do not attempt any task that you feel unsure of!
Do not let a child operate the product.
Do not let a person, without knowledge of the instructions, operate the product.
Always monitor a person, with decreased physical capacity or mental capacity, that uses the product. A responsible adult must always be there.
Never use the product if you are fatigued, while under the influence of alcohol or drugs, medication or anything that could affect your vision, alertness, coordination or judgment.
Unauthorized modifications and/or accessories may lead to serious injury or death to the user or others. Under no circumstances may the design of the product be modified without the permission of the manufacturer.
Do not modify this product or use it if it appears to have been modified by others.
Never use a product that is faulty. Carry out the safety checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions in the section "Safety instructions for maintenance"
Always use original accessories.

Work area safety

Remove branches, twigs, stones and other objects from the lawn before you start to cut.
Keep persons, including children, and animals at a safe distance from the work area.
Objects that hit against the cutting equipment can be ejected and cause damage to persons and objects.
Do not use the product in bad weather, including fog, rain, moist or wet locations, strong winds, intense cold and risk of lightning. Doing work in bad weather can cause fatigue and dangerous conditions, such as slippery surfaces.
Examine your work area to make sure that your control of the product cannot be prevented.
Be careful of roots, stones, twigs, pits and ditches. High grass can conceal obstacles.
Do not operate the product on slopes that are more than 15 degrees.
Operate the product along slopes. Do not move up and down the slope.
Be careful when you go near hidden corners and objects that can prevent your view.

Work safety

Read the warning instructions that follow before you use the product.

Use this product to cut grass lawns only. It is not permitted to use it for other tasks.
Use personal protective equipment. See "Personal protective equipment".
Do not operate the product in rain or wet conditions. The risk of electrical shock increases if water enters the product.
Do not operate the product unless the blade and all covers are attached correctly. An incorrectly attached blade can come loose and cause personal injury.
Make sure that the blade does not hit objects such as stones and roots. This can do damage to the blade and bend the motor shaft. A bent axle causes heavy vibration and a very high risk that the blade becomes loose.
If the blade hits an object or if vibrations occur, stop the product immediately. Stop the motor, turn the safety key to 0 and remove the battery. Examine the product for damages. Repair damages or let an authorised service agent do the repair.
Never attach the motor brake handle permanently to the handle when the motor is started.
Put the product on a stable, flat surface and start it. Make sure that the blade does not hit the ground or other objects.
Always stay behind the product when you operate it.
Let all the wheels stay on the ground and keep 2 hands on the handle when you operate the product. Keep your hands and feet away from the rotating blades.
Do not tilt the product when the motor is started.
Be careful when you pull the product rearward.
Never lift up the product when the motor is started. If you must lift the product, first stop the motor and remove the battery.
Do not walk rearward when you operate the product.
Stop the motor when you move across areas without grass, for example paths made of gravel, stone and asphalt.
Do not run with the product when the motor is started. Always walk when you operate the product.
Stop the motor before you change the cutting height. Never make adjustments with the motor started.
Never let the product stay out of view with the motor started. Stop the motor and make sure that the cutting equipment does not rotate.

Safety instructions for operation

Personal protective equipment

Read the warning instructions that follow before you use the product.

Personal protective equipment cannot fully prevent injury but it decreases the degree of injury if an accident does occur. Let your dealer help you select the right equipment.
Use hearing protection if the noise level is higher than 85 dB.
Use heavy-duty slip-resistant boots or shoes. Do not use open shoes or go with bare feet.
Use heavy, long pants.
Use protective gloves when necessary, for example when you attach, examine or clean the cutting equipment.

Safety devices on the product

Read the warning instructions that follow before you use the product.

Do not use a product with safety devices that are damaged or do not operate correctly.
Do a check of the safety devices regularly. If the safety devices are damaged or do not operate correctly, speak to your Husqvarna service agent.
Do not make modifications to safety devices.

To do a check of the cutting cover

The cutting cover decreases vibrations in the product and decreases the risk of injury from the blade.

Examine the cutting cover to make sure that there are no damages such as cracks.

Grass catcher

The grass catcher prevents injury to the operator from the rotating blade. The grass catcher wears during operation of the product. Regularly examine the grass catcher and replace it if it has damages. Replace only with a grass catcher approved by the manufacturer.

Motor brake handle

The motor brake handle stops the motor. When the motor brake handle is released, the motor stops.
To do a check of the motor brake, start the motor and then release the motor brake handle. If the motor does not stop in 3 seconds, let an approved Husqvarna service agent adjust the motor brake.

Battery and battery charger safety

Read the operator's manual for the battery and the battery charger and make sure that you understand the instructions before you use the product.

Battery safety

Read the warning instructions that follow before you use the product.

Use Husqvarna rechargeable batteries as a power supply for related Husqvarna products only. To prevent injury, do not use the battery as a power supply for other devices.
Do not use non-rechargeable batteries.
Risk of electrical shock. Do not connect the battery terminals to keys, coins, screws or other metal. This can cause a short circuit of the battery.
Handle batteries carefully in order not to cause a short circuit with conducting materials such as rings, bracelets, and keys. The battery or conductor can overheat and cause burn injuries.
Do not put objects into the air slots of the battery.
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C / 265°F may cause explosion.
Keep the battery away from sunlight, heat or open flame. The battery can explode and cause burns and/or chemical burns.
Keep the battery away from rain and wet conditions.
Keep the battery away from microwaves and high pressure.
Do not try to disassemble or break the battery.
Do not open or mutilate the battery. Released electrolyte is corrosive and can cause damage to the eyes or skin. It is poisonous if swallowed.
If the battery leaks, do not let the liquid touch your body or eyes. If you have touched the liquid, clean the area with a large quantity of water and get medical aid.
Use the battery in temperatures between -10°C and 40°C.
Do not clean the battery or the battery charger with water. See "To clean the battery and the battery charger".
Do not use a defective or damaged battery.
Keep batteries in storage away from metal objects such as nails, coins, jewelry.

Battery charger

The battery chargers, QC, are only used for charging of Husqvarna replacement batteries.

Minimize the risk of electric shock or short circuit as follows: Never insert any object into the charger's cooling slots. Do not try to dismantle the battery charger. Never connect the charger terminals to metal objects. Use approved and intact wall sockets.
This machine produces an electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine.
Regularly check that the battery charger connection wire is intact and that there are no cracks in it.
Never carry the battery charger using the cord and never pull out the plug by pulling the cord.
Keep all cables and extension leads away from water, oil and sharp edges. Make sure the cable is not jammed in doors, fences or the like. Otherwise it can cause the charger to become live.
Never clean the battery or the battery charger with water.
The battery charger can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Do not charge non-rechargeable batteries in the battery charger.
Do not use the battery charger close to corrosive or flammable materials. Do not cover the battery charger. Pull out the plug to the battery charger in the event of smoke or fire.
Do not use a faulty or damaged battery charger or battery.
Only charge the battery indoors and protected from direct sunlight and do not charge the battery in any wet conditions.

Safety instructions for maintenance

Read the warning instructions that follow before you use the product.

To prevent accidental start during maintenance, remove the battery and wait a minimum of 5 seconds.
Do the maintenance work correctly to increase the lifetime of the product and decrease the risk of accidents. Let an approved service agent do the professional repairs. Speak to your nearest service agent for more information.
Only do the maintenance work written in this operator's manual. All other maintenance must be done by a service agent.
Put on heavy duty gloves when you use the cutting equipment. The blade is sharp and cuts can easily occur.
Keep the cutting edges sharp and clean for the best and safest performance.
Let your service agent regularly examine the product and make necessary adjustments and repairs.
Replace damaged, worn or broken parts.
Obey the instructions of how to change accessories. Only use accessories from the manufacturer.
When not in operation, keep the product, battery and battery charger apart in a dry, indoor and locked area. Make sure that children and persons that are not approved cannot get access to the product, battery or battery charger.

SAVE THESE INSTRUCTIONS

Assembly

Before you assemble the product, read the safety chapter.

To prevent accidental start during assembly, remove the battery and wait at minimum 5 seconds.

To assemble the grass catcher

Attach the grass catcher frame to the grass bag with the rigid part of the bag on the bottom. Keep the handle of the frame on top of the grass bag.
Attach the grass bag to the grass catcher frame with the clips.

Operation

Before you operate the product, you must read and understand the safety chapter.

Battery

Before you use the battery, you must read and understand the safety chapter. You must also read and understand the operator's manual for the battery and the battery charger.

Battery status

The display shows the remaining battery capacity and if there are problems with the battery. The battery capacity is shown for 5 seconds after the motor brake handle is released. The warning symbol on the battery is on when an error has occurred. Refer to "Battery LED indicator".

Battery LED indicator

Battery LED indicator
The display shows the state of charge and if there are problems with the battery.

LED indicator	Battery status (state of charge)
LED indicator	BLi22	BLi30
4 LED lights are on	N/A	The battery is 76% - 100% charged.
3 LED lights are on	The battery is 76% - 100% charged.	The battery is 51% - 75% charged.
2 LED lights are on	The battery is 51% - 75% charged.	The battery is 26% - 50% charged.
1 LED light is on	The battery is 26% - 50% charged.	The battery is 6% - 25% charged.
1 LED light flashes	The battery is 0% - 25% charged.	The battery is 0% - 5% charged.

To install the battery charger on the wall

Do not use an electric screwdriver to install the battery charger to the wall. An electric screwdriver can cause damage to the battery charger.

Install the battery charger on the wall withthe 2 screws (A). Use wall plugs (B) if it is necessary.
Install the 2 screw hole plugs (C).
Connect the power cord (D) to the battery charger and a mains socket.

To charge the battery

Make sure that the battery, the battery charger and the terminals on the battery are clean and dry. Do not put the battery in the battery charger if it is dirty or wet.

Connect the battery charger to a power outlet. The charging LED flashes red 1 time and green 1 time.

Only connect the battery charger to a power outlet with the voltage and frequency specified on the rating plate.
Connect the battery to the battery charger. The charging LED comes on.
Remove the battery from the battery charger when it is fully charged. Push the battery indicator button for battery status. When all the LED indicators come on, the battery is fully charged.
Pull the power plug to disconnect the battery charger from the power outlet. Do not pull the power cord.

Battery charging status

A Husqvarna Li-ion battery can be charged or used at all charging levels. The battery is not damaged. A fully charged battery will not decrease its charge when the battery is left in the charger.

LED display	Charging status
LED 1 flashes	0%-25%
LED 1 is lit, LED 2 flashes	25%-50%
LED 1, LED 2 are lit, LED 3 flashes	50%-75%
LED 1, LED 2, LED 3 are lit, LED 4 flashes	75%-100%
LED 1, LED 2, LED 3, LED 4 are lit	Fully charged

To set the product in operation position

Push and hold the release button.
Lift the handle to upright position until the latches go into the one of the slots on the handle support.

Note: Before use, please make sure that the latch is in the slot of the support plate.
Release the handle release button.

To set the cutting height

The cutting height can be adjusted in 7 levels.

Move the cutting height lever out and reward to increase the cutting height.
Move the cutting height lever out and forward to decrease the cutting height.

Do not set the cutting height too low. The blades can hit the ground if the surface of the lawn is not flat.

To use the product with the grass catcher

Do not operate the product without a grass catcher installed or without the rear cover closed. Objects can eject and cause injury to the operator.

Lift the rear cover and remove the mulch plug.
Assemble the grass catcher, refer to "To assemble the grass catcher".
Put the grass catcher on the bracket.
Release the rear cover and put it on top of the grass bag frame.

To change the product to mulching mode

The mulching mode of the product makes grass clippings smaller. The grass clippings then fall onto the lawn and scatter across the grass. Mulched grass biodegrades quickly to give nutrients for the lawn.

Lift the rear cover and remove the grass bag, if it is installed.
Put the mulch plug into the collector channel.
Let the rear cover close and make sure it tightly closes against the mulch plug.

To change the product to rear-side discharge mode

Lift the rear cover and remove the mulch plug.
Install the discharge chute.
Release the rear cover and put it on top of the discharge chute.

To cut grass without a grass catcher or mulch plug attached

Lift up the rear cover and remove the grass catcher.
If a mulch plug is attached, remove it.
Close the rear cover before you operate the product.

When you operate the product, the cut grass discharges below the rear cover.

To start the product

Put a charged battery in battery compartmen number 1 below the battery cover. For longer operation time, put a second charged battery in battery compartment number 2.
Close the battery cover.
Note: Always keep the battery cover closed during operation.
Stay behind the product.
Push the ON/OFF button (A) on the control panel.
Push the motor brake handle in the direction of the handlebar. The green LED (B) flashes.
Push the blade start/stop button to start the blades.

To use the drive on the wheels

Push the drive control buttons on the handlebar.
Move the drive speed control to set the drivespeed. Move the drive speed control down for slower speed. Move the drive speed control up for faster speed.
Release the drive control buttons to disengage the drive, for example when you go near an obstacle.

To stop the product

Release the motor brake handle to stop the motor.
Press the ON/OFF button (A) on the control panel and the green LED (B) goes out.

Note: The control panel is automatically set to OFF if you do not operate the product or push buttons for 2 minutes.
Open the battery lid.
To remove the battery, push the 2 release buttons and pull out the battery.
Charge the battery if it is weak. For more information, refer to. "To charge the battery".

To get a good result

Always use a sharp blade. A blunt blade gives an irregular result and the cut surface of the grass becomes yellow. A sharp blade also uses less energy than a blunt blade.
Do not cut more than ⅓ of the length of the grass. Cut first with the cutting height set high. Examine the result and lower the cutting height to an applicable level. If the grass is very long, drive slowly and cut 2 times if necessary.
Cut in different directions each time to prevent stripes in the lawn.
Keep the cutting cover clean. Buildup from grass and dirt on the inner side of the cutting cover can decrease the cutting result. Refer to "To clean the product".

To set the cut mode

The product can be set to a cut mode. You can select between 3 cut modes for the product, refer to "Symbols on the product".

warning Note: When the product is in operation, it is automatically set to Mulching/High quality mode.

warning Note: When the battery is weak, the product operates in Sensing mode.

Start the product, refer to "To start the product".
Press the cut mode button to change the cut mode, refer to "Cut mode".

Cut mode

	Sensing
	Mulching/High quality ^{^[1]}
	Max power

¹When the product is in operation, it is automatically set to Mulching/High quality mode.

Grass type	Cut Amount (cm/in)	Operation mode
Grass type	Cut Amount (cm/in)	Mulch plug	Discharge chute	Grass catcher
Thin or dry	< 2.54/1.00	Sensing	Sensing	Sensing
	2.54/1.00	Mulching/High Quality	Sensing	Sensing
	3.81/1.50	Mulching/High Quality	Sensing	Mulching/High Quality
	5.08/2.00	Not recommended	Sensing	Mulching/High Quality
	> 5.08/2.00	Not recommended	Mulching/High Quality	Not recommended
Thick or wet	< 2.54/1.00	Sensing	Sensing	Sensing
	2.54/1.00	Mulching/High Quality	Sensing	Mulching/High Quality
	3.81/1.50	Max power	Sensing	Mulching/High Quality
	5.08/2.00	Not recommended	Mulching/High Quality	Mulching/High Quality
	> 5.08/2.00	Not recommended	Max power	Not recommended

Maintenance

Before you do maintenance, you must read and understand the safety chapter.

For all servicing and repair work on the product, special training is necessary. We guarantee the availability of professional repairs and servicing. If your dealer is not a service agent, speak to them for information about the nearest service agent.

Maintenance schedule

The maintenance intervals are calculated from daily use of the product. The intervals change if the product is not used daily.
For maintenance identified with * refer to instructions in "Safety".

	Each use	Monthly	Each season
Do a general inspection.	X
Clean the product.	X
Clean or replace the filter			X
Make sure that the safety devices on the product are not defective. *	X
Examine the cutting equipment.	X
Examine the cutting cover *	X
Do a check of the motor brake handle *	X
Make sure that the ON/OFF button operates correctly and is not defective.	X
Examine the battery for damage.	X
Do a check of the battery charge.	X
Make sure that the release buttons on the battery operate correctly and that the battery locks into the product.	X
Examine the battery charger for damage and make sure that it operates correctly.		X
Examine the connections between the battery and the product. Also examine the connection between the battery and the battery charger.			X

To do a general inspection

Make sure that the nuts and screws on the product are tightened.
Make sure that the cables on the product are not in a position where they can get damaged.

To clean the product

Clean plastic parts with a clean and dry cloth.
Do not use water to clean the product. Water can enter the battery or the motor and cause short circuit or damage to the product.
Do not use a high pressure washer to clean the product.
Do not flush water directly on the motor.
Use a brush to remove leaves, grass and dirt.

To clean the battery and the battery charger

Do not clean the battery or the battery charger with water.

Do not use any chemical substances to clean the battery.

Make sure that the battery and the battery charger are clean and dry before you put the battery into the battery charger.
Clean the battery terminals with compressed air or use a soft and dry cloth.
Clean the surfaces of the battery and the battery charger with a soft and dry cloth.

To examine the cutting equipment

To prevent accidental start, remove the battery and wait a minimum 5 seconds.

Use protective gloves when you do maintenance on the cutting equipment. The blade is sharp and cuts can easily occur.

Examine the cutting equipment for damage or cracks. Always replace a damaged cutting equipment.
Look at the blade to see if it is damaged or blunt.

warning Note: It is necessary to balance the blade after it is sharpened. Let a service center sharpen, replace and balance the blade. If you hit an obstacle that causes the product to stop, replace the damaged blade. Let the service center estimate if the blade can be sharpened or must be replaced.

To replace the blade

Refer to "Technical data" for the correct type of blade.

Lock the blade with a block of wood to prevent injury to fingers when you replace the blade. The blade can be moved when the motor is off and fingers can become trapped between the blade and stationary parts.

Lock the blade with a block of wood.
Remove the blade bolt.
Remove the blade.
Examine the blade support and blade bolt to see if there are damages.
Examine the motor shaft to make sure that it is not bent.
When you attach the new blade, point the angled ends of the blade in the direction of the cutting cover.
Make sure that the blade is aligned with the center of the motor shaft.
Lock the blade with a block of wood. Attach the spring washer and tighten the bolt and washer with a torque of 48-54 Nm.
Pull the blade around by hand and make sure that it turns freely.

Use heavy duty gloves. The blade is very sharp and cuts can easily occur.
Start the product to do a test of the blade. If the blade is not correctly attached, there is vibration in the product or the cutting result is unsatisfactory.

To clean the air filter

Remove the screws to remove the air filter cover.
Remove the air filter from the air filter cover.
Examine the air filter for damages. Replace a damaged air filter.
Wash the air filter with a warm soap water solution.

Do not use solvent or compressed air to clean the air filter.
Let the air filter dry fully.
Install the air filter and air filter cover.

Troubleshooting

Lawn mower

Problem	Cause	Solution
The drive on the wheels does not operate correctly.	The transmission is too hot.	Put the product in a cool area away from open sunlight. Wait at minimum 30 minutes to let the product become cool before you start the product again.

Battery

LED on the battery	Cause	Solution
The green LED flashes.	The battery voltage is low.	Charge the battery. Refer to "To charge the battery".
The error LED flashes.	The battery is weak.	Charge the battery. Refer to "To charge the battery".
	The temperature in the work environment is too high or too low.	Use the battery in temperatures between -10°C and 40°C.
	Overvoltage.	Make sure that the mains voltage is the same as on the rating plate on the product.
	Overvoltage.	Remove the battery from the battery charger. Wait 5 seconds and try again to charge the battery. If the problem continues, speak to an approved service agent.
The error LED is on.	The cell difference too much (1V).	Speak to an approved service agent.

Battery charger

LED on the battery charger	Cause	Solution
The error LED flashes.	The temperature in the work environment is too high or too low.	Use the battery charger in temperatures between 5°C and 40°C.
The error LED is on.		Speak to an approved service agent.

Control panel

If you cannot find a solution to the problem, speak to your Husqvarna service agent.

Keypad	Possible faults	Possible action
Error LED flashes	The handle is not fully expanded and locked in the operation position.	Fully extend the handle and lock it in the operation position. Refer to "To set the product in operation position". After this step, push the ON/OFF button to make the error LED go out.
	Low battery power.	Charge the battery. Refer to "To charge the battery". After this step, push the ON/OFF button to make the error LED go out.
	There is overload in the motor.	Increase the cutting height. Refer to "To set the cutting height". After this step, push the ON/OFF button to make the error LED go out.
	There is overload in the motor.	Remove grass blockage around the blade. Remove the battery and manually remove the grass.
	Battery error or no signal from the battery.	Put the battery in the product correctly. Refer to "To start the product". After this step, push the ON/OFF button to make the error LED go out.
	Battery error or no signal from the battery.	Replace the battery. Refer to "To start the product". After this step, push the ON/OFF button to make the error LED go out.
Error LED stays on	Servicing or repair of the product is necessary.	Stop the product immediately and speak to your Husqvarna service agent.
High temperature indicator	The motor control is too hot.	Stop the motor and wait until it has become cool.
The product stops	The battery is weak.	Charge the battery. Refer to "To charge the battery".
The product stops	The battery connector failure.	Examine the battery connector.

Transportation, storage and disposal

To prevent accidental start during transport, remove the battery and wait a minimum of 5 seconds.

To set the product in transport position

Remove the grass catcher (if installed).
Push and hold the handle release button.
Fold the handle.

Transportation

The Dangerous Goods Legislation requirements apply to the contained Li-ion batteries.
For commercial transports special requirements on package and labels must be obeyed.
Make sure that you obey the regulations for dangerous material when you prepare the product for transport. Local regulations can apply.
Always remove the battery for transport.
Put tape on the battery connectors and make sure that the battery cannot move around during transport.
Attach the product during transport.

Storage

Always remove the battery for storage.
To prevent accidents, make sure that the battery is not connected to the product during storage.
Keep the battery charger in a closed and dry space.
Keep the battery and the battery charger in a dry space where there is no moisture or frost.
Disconnect the battery from the battery charger during storage.
Do not keep the battery where static electricity can occur. Do not keep the battery in a metal box.
Keep the battery where the temperature is between 5°C and 25°C and out of sunlight.
Keep the battery charger where the temperature is between 5°C and 45°C and out of sunlight.
Make sure that the battery is charged to 30% - 50% before you put it in storage for long periods.
Keep the product, battery and battery charger in a locked area out of reach for children and not approved persons.
Clean the product and do a complete servicing before you put the product in storage for a long time.

Disposal

The product must be submitted to an appropriate recycling station for the recovery of electrical and electronic equipment.
By ensuring that this product is taken care of correctly, you can help to counteract the potential negative impact on the environment and people that can otherwise result through the incorrect waste management of this product. For more detailed information about recycling this product, contact your municipality, your domestic waste service or the shop from where you purchased the product.

Technical data

			LE 322R
Cutting motor
Motor type			BLDC (brushless) 36V
Motor speed – Sensing mode, rpm			2600-2900
Motor speed – Mulching / high quality mode, rpm			3000-3300
Motor speed – Maximum power mode, rpm			3400
Motor output – max. kW (HP)			2.1 (2.9)
Motor output – Nominal, kW (HP)			1.25 (1.7)
Overcurrent limit – 1 battery, (Current limit: 900W-35A)			45A (+/-) 1A
Overcurrent limit – 2 batteries, (Current limit: 900W-35A)			75A (+/-) 1A
Drive motor
Motor output – Nominal, kW (HP)			0.2-0.4 (0.27-0.55)
Self walk speed, km/h (mph)			0–6.4 (0-4)
Speed adjustment levels			9
Weight
Weight without battery (Grass catcher included), kg (lb)			34.3 (75.6)
Battery ^{^[2]}
Type of battery			Husqvarna Battery Series
Battery runtime
Battery runtime, max, (free run) with Sensing mode activated, with two Husqvarna 7.5 Ah batteries (BLi30).			75
Cutting
Cutting height, in / cm			1.3-4.5 / 3.3-11.4
Cutting width, in / cm			20.2 / 51.3
Blade			Mulch 5375821-41
Bagger capacity, litre			65
Approved batteries	Type	Battery capacity, Ah	Voltage, V	Weight, lb/kg
BLi30	Lithium-ion	7.8	36	4.2/1.9
BLi22	Lithium-ion	4.0	36	2.65/1.2