Table of Contents
Advertisement
Instrument and control functions
Seat
To remove the seat
Insert the key into the seat lock, turn it
counterclockwise, and then pull the
3
seat off.
2
ZAUM1344
1. Seat lock
2. Unlock.
To install the seat
Fit the slot in the seat onto the projec-
tion as shown, orient the seat in order
to insert the seat bracket into the seat
lock, push the rear of the seat down to
lock it in place, and then remove the
key.
EAU83140
1
2
1. Slot
2. Projection
3. Seat bracket
1
4. Seat lock
TIP
Make sure that the seat is properly se-
cured before riding.
Helmet holding cable
3
A helmet holding cable is located un-
der the seat. Use this cable in conjunc-
tion with the screwdriver to secure a
helmet to the vehicle.
4
ZAUM1359
1. Helmet holding cable
2. Screwdriver
To secure a helmet with the helmet
holding cable
1. Remove the seat. (See page 3-19.)
2. Remove the screwdriver from its
3-19
1
2
holders by pulling it up from the
left side, and then remove the hel-
met holding cable from the screw-
driver.
EAUM3640
Advertisement
Table of Contents
Troubleshooting
