Setting The Dip Switches; Setting Procedure - Epson TM-C3400BK Technical Reference Manual
Hide thumbs
Also See for TM-C3400BK:
- User manual (68 pages) ,
- Datasheet (2 pages) ,
- Start here (2 pages)
Table of Contents
Advertisement
Setting the DIP Switches
Change the DIP switch settings in the following cases.
• When attaching the power switch cover to prevent the power switch from being pressed
• When switching the paper type between roll paper and fanfold paper (The default setting is roll
paper)
• When changing the volume of the buzzer
Setting Procedure
Follow the steps below to change the DIP switch settings.
Turn the power off before removing the DIP switch cover.
Otherwise, a short-circuit may cause the printer to malfunction.
CAUTION
DIP switch setting becomes enabled after turning the power on or completing reset by the
interface.
1
Make sure the power supply for the printer is turned off.
2
Open the ink cartridge cover and remove the DIP switch cover.
3
Set the DIP switches, using the tip of a tool, such as a small screwdriver.
4
Attach the DIP switch cover, and close the ink cartridge cover.
74
Advertisement
Table of Contents
