Epson TM-C3400BK Technical Reference Manual page 58
Hide thumbs
Also See for TM-C3400BK:
- User manual (68 pages) ,
- Datasheet (2 pages) ,
- Start here (2 pages)
Table of Contents
Advertisement
Paper
• When using a full-page label, remove the ejected label each time the printing is finished. Other-
wise, a part of printed label may be cut, or a cutter error may occur. (See
on page
19.)
• When cutting the full-page label, adhesive from labels may stick to the fixed blade of the autocut-
ter, which may prevent the autocutter from cutting paper cleanly. If this happens, clean the cutter
blade. For details, see
Turning on/off the power switch
• If you turn the printer off without using the power switch, the print head may not return to its
home position. In this case, the next time the printer is turned on, auto head cleaning is performed,
which wastes ink.
Printing
• For the USB model, it takes time for the next printing if you turn the printer off and on after print-
ing.
• The colors of printouts may become abnormal if you tilt this product or subject the printer to any
shocks. When you move this product after ink charging, check the colors by performing a test
print.
If the colors of printouts are not normal, perform head cleaning. See
page 194
for how to perform head cleaning.
• When printing image data, white lines (lines shown in white) or black lines (overlapping of
image) may appear at about 1 inch intervals in the print result. By setting [Print Head Alignment]
- [Media Feed Adjustment] in [Maintenance And Utilities] tab, this can be reduced but cannot be
removed completely.
• When printing image data, change of color tone may appear at 1 inch intervals in the print result.
58
"Cleaning the Autocutter" on page
"Status/Error Indications"
196.
"Manual Head Cleaning" on
Advertisement
Table of Contents
