Table of Contents
Advertisement
Periodic maintenance and adjustment
10. Rotate the secondary sliding sheave
clockwise and push it so that it separates
from the secondary fixed sheave.
1. Secondary sliding sheave
2. Secondary fixed sheave
11. Install the V-belt between the secondary
sliding and fixed sheaves.
1. V-belt
12. Install the drive guard and close the
shroud.
ESU12585
Drive chain housing
To check the drive chain housing oil level
1.
Place the snowmobile on a level surface
and apply the parking brake.
2.
Remove the rubber cap.
58
1. Rubber cap
3.
Check the oil level through the check
window, located on the drive chain hous-
ing. If the oil is below the minimum level
mark, remove the dipstick and add suffi-
cient oil of the recommended type to
raise it to the maximum level mark.
NOTICE: Make sure that no foreign
material enters the drive chain hous-
ing.
[ECS00532]
1. Drive chain oil level check window
2. Maximum level mark
3. Minimum level mark
1
1
2
3
Hide quick links:
Advertisement
Table of Contents
