Table of Contents
Advertisement
Listening to your system
Using Advanced Surround
The Advanced Surround effects can be used with any
multichannel or stereo source for a variety of additional
surround sound effects.
HTP-33 only: If you set up the system for Front surround
(page 7), the Front Surround modes will give the best
results (see Using Front Surround (HTP-33 only) above).
ST
SOUND
SOUND
RETRIEVER
SURROUND
ADVANCED
CHANNEL
TV
•
Press ADVANCED to select an Advanced Surround
mode.
Press repeatedly to select:
• ADVMOVIE – Suitable for movies
• ADVMUSIC – Suitable for music
• EXPANDED – Wide sound field
• TV SURR. – Surround sound for mono or stereo TV
broadcasts
• SPORTS – Suitable for sports programming
• GAME – Suitable for TV game units
• VIRTUAL – A virtual surround effect using just the
subwoofer and front speakers.
• 5 STEREO – Powerful surround sound for stereo
music sources
Listening in stereo
You can listen to any source—stereo or multichannel—in
stereo. When playing a multichannel source, all
channels are downmixed to the front left/right speakers
and the subwoofer.
SOUND
SOUND
RETRIEVER
SURROUND
ADVANCED
CHANNEL
TV
TV CONTROL
•
Press SURROUND repeatedly until STEREO shows in
the display.
• You can also use the SURROUND button on the
display unit to change the listening mode.
ST
ENTER
TEST
TONE
TUNE
MCACC
VOLUME
INPUT
TEST
TONE
TUNE
MCACC
VOLUME
INPUT
Using the Sound Retriever
When audio data is removed during the MP3 or WMA
compression process, sound quality often suffers from
an uneven sound image. The Sound Retriever feature
employs new DSP technology that helps bring CD quality
sound back to compressed 2-channel audio by restoring
sound pressure and smoothing jagged artifacts left over
after compression.
ST
SOUND
SOUND
RETRIEVER
SURROUND
ADVANCED
CHANNEL
TV
•
While listening to a stereo source, press SOUND
RETRIEVER .
Press repeatedly to switch between:
• RTRV ON — Switches the Sound Retriever on.
• RTRV OFF — Switches the Sound Retriever off.
Listening with Acoustic Calibration EQ
You can listen to sources using the Acoustic Calibration
EQ set in Using the Auto MCACC setup for optimal
surround sound on page 17.
ENTER
SETUP
ST
SOUND
SOUND
RETRIEVER
SURROUND
ADVANCED
CHANNEL
1
Press SOUND .
2
Use the
(cursor left/right) buttons to select
MCACC EQ then press ENTER .
3
Use the
(cursor up/down) buttons to switch
EQ ON or EQ OFF then press ENTER to confirm.
• On the EQ OFF setting, equalization is set to off and
speaker settings (channel delay and channel level)
remains as it is set.
• Acoustic Calibration EQ is set to on automatically
after Auto MCACC setup is used.
TUNE
ST
ENTER
TEST
TONE
TUNE
MCACC
VOLUME
INPUT
SLEEP
CLEAR
SR
TUNE
ST
ENTER
TEST
TONE
TUNE
MCACC
VOLUME
05
21
En
Advertisement
Chapters
Table of Contents
