Table of Contents
Advertisement
User's Manual
Wireless communication switch
You can enable or disable wireless LAN and Bluetooth functions, with the on/off
switch. No transmissions are sent or received when the switch is off. Slide the
switch to the right to turn it on and to the left to turn it off.
CAUTION: Set the switch to off in airplanes and hospitals. Check the
indicator. It will stop glowing when the wireless communication function
is off.
Wireless communication Indicator
The wireless communication indicator indicates the status of the wireless communi-
cation functions.
Indicator status Indication
Indicator off
Indicator glows
If you used the Task Bar to disable W-LAN, restart the computer or follow the
procedures below to enable the system to recognize W-LAN. Open or click the
following: start, Control Panel, System, Hardware Device Manager,
Network adapters, TOSHIBA Wireless LAN Mini PCI Card or Atheros
AR5001X Mini PCI Wireless Network Adaptor and enable.
LAN
The computer has built-in support for Ethernet LAN (10 megabits per second,
10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-Tx) and Gigabit
Ethernet LAN (1000 megabits per second, 1000BASE-T).
This section describes how to connect/disconnect to a LAN.
CAUTION: Do not install or remove an optional memory module while
Wake-up on LAN is enabled.
NOTE: The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this feature.
4-26
Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction
Wireless communication switch is on.
Wireless LAN or Bluetooth is turned on by an applica-
tion.
Get other manuals https://www.bkmanuals.com
Advertisement
Table of Contents
