Figure 23. Lift the LCD module
Screw specifications
Note: For LCD panel with the factory color calibration feature, do the following to install new color profiles:
1. Connect your computer to the network and close the X-Rite Color Assistant program.
2. Go to
https://pcsupport.lenovo.com/us/en/downloads/DS543953
Double-click the EXE file and follow the on-screen instructions to finish the installation.
3. Go to C:\Program files (x86)\X-Rite Color Assistant and locate the
ProfileUpdaterForDisplayReplacement.exe file. Double-click the EXE file. Follow the on-screen
instructions to input the display serial number and click Submit. You can find the display serial number
and instructions on a sticker fixed to the front of the new LCD part. When the new color profiles are
installed successfully, a prompted window will be displayed.
Go to
https://support.lenovo.com/partslookup
part:
LCD module
Remove the upper case
Make sure the following FRUs (CRUs) have been removed.
"Remove the rubber foot" on page 28
"Remove the lower case" on page 29
"Remove the battery pack" on page 30
"Remove the solid-state drive (SSD)" on page 30
"Remove the antenna module" on page 32
"Remove the heat sink" on page 32
"Remove the fans" on page 33
"Remove the speakers" on page 34
"Remove the touchpad board cable" on page 35
40
Hardware Maintenance Manual
Number of screws
6
to download the installation software.
to look up the Lenovo part number of the following replacement