Table of Contents
Advertisement
Section 3 - Configuration
Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select
this option if your ISP does not specify an IP address to use. Click Save at any time to save the changes you have made on this
page.
Host Name
The host name is optional but may be required by some ISPs.
Leave it blank if you are not sure.
Primary DNS Server
Enter the primary DNS server IP address assigned by your ISP.
This address is usually obtained automatically from your ISP.
Secondary DNS Server
Enter the secondary DNS server IP address assigned by your ISP.
This address is usually obtained automatically from your ISP.
MTU
Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your ISP.
MAC Address Clone
The default MAC address is set to the Internet port's physical
interface MAC address on the router. You can use the drop-
down menu to replace the Internet port's MAC address with
the MAC address of a connected client.
D-Link DIR-2055 User Manual
IPv4 - Dynamic IP (DHCP)
Advanced Settings...
34
Advertisement
Table of Contents
