Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FBB73937ZW
Summary of Contents for AEG FBB73937ZW
- Page 1 EN User Manual | Dishwasher FBB73937ZW FBB73937ZM...
-
Page 2: Table Of Contents
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning...
-
Page 4: Safety Instructions
• Follow the maximum number of 14 place settings. • The appliance door should not be left in an open position to avoid the tripping hazard. • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. - Page 5 Make sure that there is access to the • Do not remove the dishes from the mains plug after the installation. appliance until the programme is • Do not pull the mains cable to disconnect complete. Some detergent may remain on the appliance.
-
Page 6: Product Description
2.6 Disposal • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. WARNING! • Remove the door catch to prevent children Risk of injury or suffocation. and pets to get closed in the appliance. 3. -
Page 7: Control Panel
4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is always off while the pro‐ gramme operates. Rinse aid indicator. -
Page 8: Programmes
Indicator Description ExtraHygiene indicator. 5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Dishwasher Degree of Programme phases Options load soil Crockery, cut‐ Normal, lightly • Prewash • ExtraPower lery, pots, pans dried-on •... - Page 9 Programme Dishwasher Degree of Programme phases Options load soil None Cleaning the • Cleaning 70 °C appliance inte‐ • Intermediate rinse rior • Final rinse • AirDry • Prewash This programme offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil.
-
Page 10: Options
For any other questions regarding your dishwasher, refer to the service book provided with your appliance. 6. OPTIONS prevents rapid changes in the dishwashing temperature of the selected programme and reduces it to 45 °C. Desired options must be activated every time before you start a programme. - Page 11 The saved settings remain valid until you To enter user mode, press and hold change them again. simultaneously Delay and Option until the indicators How to set the programme selection flash and the display is blank. mode 7.2 The water softener The appliance is in programme selection The water softener removes minerals from mode when the programme indicator...
- Page 12 Regeneration process when it occurs at any point at the beginning For the correct water softener operation, the or in the middle of a programme. resin of the softener device needs to be regenerated regularly. This process is automatic and is the part of the normal All the consumption values mentioned in dishwasher operation.
-
Page 13: Before First Use
• The display shows the current setting. When AirDry opens the door, the display shows the remaining time of the running – = the rinse aid empty programme. notification is deactivated. – = the rinse aid empty CAUTION! notification is activated. Do not try to close the appliance door 2. -
Page 14: Daily Use
8.2 How to fill the rinse aid How to fill the salt container dispenser 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (only for the first time). 3. - Page 15 9.1 Using the detergent • When the programme is complete. • After 5 minutes if a programme was not started. Starting a programme 1. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode and the door is closed.
-
Page 16: Hints And Tips
Cancelling the programme Press and hold simultaneously Delay and Do not try to close the appliance door Option until the appliance is in programme within 2 minutes after AirDry selection mode. automatically opens it as this may cause Make sure that there is detergent in the damage to the appliance. - Page 17 • Detergent tablets do not fully dissolve with • Do not wash in the appliance items made short programmes. To prevent detergent of wood, horn, aluminium, pewter and residues on the tableware, we recommend copper as they could crack, warp, get that you use tablets with long discoloured or pitted.
-
Page 18: Care And Cleaning
11. CARE AND CLEANING 3. Reassemble the filters as instructed in WARNING! this chapter. Before maintenance, deactivate the 11.3 External cleaning appliance and disconnect the mains plug from the main socket. • Clean the appliance with a moist soft cloth. •... - Page 19 3. Remove the flat filter (A). 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.5 Cleaning the lower spray arm We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
- Page 20 1. Release the stoppers on the sides of the sliding rails of the cutlery drawer and pull 3. To install the spray arm back, press it the drawer out. downwards. 11.6 Cleaning the upper spray arm 2. Move the upper basket to the lowest level to reach the spray arm more easily.
-
Page 21: Troubleshooting
5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and block the stoppers. - Page 22 Problem and alarm code Possible cause and solution The anti-flood device is on. • Close the water tap. The display shows i30. • Make sure that the appliance is correctly installed. • Make sure the baskets are loaded as instructed in the user manual. Malfunction of the water level detec‐...
- Page 23 Problem and alarm code Possible cause and solution The appliance trips the circuit-beak‐ • The amperage is insufficient to supply simultaneously all the applian‐ ces in use. Check the socket amperage and the capacity of the meter or turn off one of the appliances in use. •...
- Page 24 Problem Possible cause and solution The interior of the appliance is wet. • This is not a defect of the appliance. Humidity condensates on the appliance walls. Unusual foam during washing. • Use the detergent designed specifically for dishwashers. • Use a detergent from a different manufacturer.
-
Page 25: Technical Information
13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 597 / 818 - 878 / 576 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 10 (1) Water supply min. - Page 28 156821090-A-132023...