hit counter script
Panasonic KX-TDA3480 Programming Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Gateway
  5. KX-TDA3480
  6. Programming manual

Panasonic KX-TDA3480 Programming Manual

4-channel voip gateway card
Hide thumbs Also See for KX-TDA3480:
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you for purchasing the Panasonic 4-Channel VoIP Gateway Card, KX-TDA3480/KX-TDA0484.
Please read this manual carefully before using this product and save this manual for future use.
4-Channel VoIP Gateway Card
Programming Guide
KX-TDA3480
KX-TDA0484
Model

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TDA3480

Summary of Contents for Panasonic KX-TDA3480

  • Page 1 4-Channel VoIP Gateway Card Programming Guide KX-TDA3480 KX-TDA0484 Model Thank you for purchasing the Panasonic 4-Channel VoIP Gateway Card, KX-TDA3480/KX-TDA0484. Please read this manual carefully before using this product and save this manual for future use.

  • Page 2: Table Of Contents

    Table of Contents IP-GW4 Maintenance Utility ............3 Starting the IP-GW4 Maintenance Utility............... 4 Administrator Functions..............7 Main Menu for the Administrator ................8 Programming ......................10 2.2.1 Network Parameters....................10 2.2.2 H.323 Parameters ....................13 2.2.3 Voice Communication Parameters ................17 2.2.4 VoIP Gateway/IP-PBX Interface Parameters............

  • Page 3: Ip-Gw4 Maintenance Utility

    Section 1 IP-GW4 Maintenance Utility Programming of the VoIP Gateway Card is carried out through a web programming utility called the IP-GW4 Maintenance Utility. This section provides the start-up procedure for the IP-GW4 Maintenance Utility. Programming Guide...

  • Page 4: Starting The Ip-Gw4 Maintenance Utility

    1.1 Starting the IP-GW4 Maintenance Utility Starting the IP-GW4 Maintenance Utility There are two different log-in levels to the IP-GW4 Maintenance Utility, a web programming utility for the VoIP Gateway Card: Administrator level and Installer level. These levels provide different programming options. For full discussions of Administrator-level programming and Installer-level programming, refer to "2 Administrator Functions"...
  • Page 5 1.1 Starting the IP-GW4 Maintenance Utility Notes • If another user is already logged in, you will be rejected. • For readability of the text on the screen, it is recommended that you adjust the text size of Internet Explorer to below medium. •...
  • Page 6 1.1 Starting the IP-GW4 Maintenance Utility Programming Guide...

  • Page 7: Administrator Functions

    Section 2 Administrator Functions This section provides operating instructions for the IP- GW4 Maintenance Utility when logged in as the Administrator. Programming Guide...

  • Page 8: Main Menu For The Administrator

    2.1 Main Menu for the Administrator Main Menu for the Administrator The IP-GW4 Maintenance Utility provides the following menu to a user logged in as the Administrator. Programming Guide...
  • Page 9 2.1 Main Menu for the Administrator Programming Menu Section Reference 1.1 Network Settings, General 2.2.1 Network Parameters 1.2 H.323 Detailed Settings 2.2.2 H.323 Parameters 1.3 Voice Communication Detailed Settings 2.2.3 Voice Communication Parameters 1.4 VoIP Gateway/IP-PBX Interface Settings 2.2.4 VoIP Gateway/IP-PBX Interface Parameters 1.5 Hunt Pattern (for Incoming Calls) 2.2.5 Hunt Pattern Parameters 1.6 DN2IP (Dialed Number to IP Address...

  • Page 10: Programming

    2.2 Programming Programming 2.2.1 Network Parameters Click 1.1 Network Settings, General in the main menu. Current IP Address, Current Subnet Mask, and Current Default Gateway show the current IP address settings of the VoIP Gateway Card. Assign each parameter referring to the descriptions below. At any time during the session, you can: •...
  • Page 11 2.2 Programming Parameter Descriptions The parameters indicated with "#" must be changed while the card is in the "STOP" status (see "2.3.1 Status Control"). The changes must be followed by a reboot to become effective (see "2.5.1 Reboot"). IP Address Settings Parameter &...
  • Page 12 2.2 Programming HTTP Port Number Settings Parameter & Description Default Value Range HTTP Port No. 1 to 65535 Specifies the port number for HTTP communications by the card. Generally, there is no need to change the default value. Others Parameter & Description Default Value Range Host Name...

  • Page 13: H.323 Parameters

    2.2 Programming 2.2.2 H.323 Parameters Click 1.2 H.323 Detailed Settings in the main menu. Assign each parameter referring to the descriptions below. At any time during the session, you can: • Click ALL CLEAR to reset all parameters to the default values. •...
  • Page 14 2.2 Programming Parameter Descriptions The parameters indicated with "#" must be changed while the VoIP Gateway Card is in the "STOP" status (see "2.3.1 Status Control"). The changes must be followed by a reboot to become effective (see "2.5.1 Reboot"). The parameters indicated with "*"...
  • Page 15 2.2 Programming Voice CODEC Settings Parameter & Description Default Value Range Voice CODEC Priority 1st–4th 1st: G.729A G.723.1, 2nd: No default G.729A, Specifies the type of CODEC for voice 3rd: No default G.711Mu, communications. 4th: No default G.711A Choose the appropriate CODEC for the network environment (e.g., bandwidth, CODEC conditions of the remote terminal).
  • Page 16 2.2 Programming Parameter & Description Default Value Range Gatekeeper Connection Checking Interval 0 (disable), 1 to 1440 (min) 0-1440min Specifies the time (in minutes) between periodic checks of connection to the gatekeeper. When the primary gatekeeper fails, these checks can detect the failure.

  • Page 17: Voice Communication Parameters

    2.2 Programming 2.2.3 Voice Communication Parameters Click 1.3 Voice Communication Detailed Settings in the main menu. Assign each parameter referring to the descriptions below. At any time during the session, you can: • Click ALL CLEAR to reset all parameters to the default values. •...
  • Page 18 2.2 Programming Parameter Descriptions QoS Field Settings The parameters below are used to set the ToS (Type of Service) field in the header of IP packets to control QoS of VoIP communications. For more information about QoS, refer to "A1.4 QoS (Quality of Service)" of the VoIP Gateway Card Getting Started.
  • Page 19 2.2 Programming Parameter Default Value Range G.723.1 Jitter Buffer Adjustment Interval (s) 1- 1 to 5 CODEC Frame Settings The parameters below are used to set the interval between packet transmissions for each type of CODEC. It is recommended that all VoIP Gateway Cards in a VoIP network have the same settings for these parameters.
  • Page 20 2.2 Programming Parameter & Description Default Value Range FAX Signal Detection Don’t use Use, Don’t use Specifies the use of the fax signal detection feature. Fax signal detection enables end-to-end fax signal relay over the network. For details, refer to "Detailed Explanations". FAX High Reliable Method (Original) Don’t use Use,...
  • Page 21 2.2 Programming DSCP DSCP: 0 DSCP: 1 DSCP: 62 DSCP: 63 Bit 8 Reserved Reserved Bit 15 Bit 0 Bit 32 IP Header Version Type of Service Total Length IP Packet HEX: 0 HEX: 1 HEX: FE HEX: FF Bit 8 Bit 15 Bit 0 Bit 32...
  • Page 22 2.2 Programming Required Bandwidth for Voice Communication via WAN (PPP: Point-to-Point Protocol) Packet Sending Interval CODEC 20 ms 30 ms 40 ms 60 ms 90 ms G.711 84 kbps 77.3 kbps 74 kbps — — G.729A 28 kbps 21 kbps 18 kbps —...
  • Page 23 84 kbps 77.3 kbps 74 kbps 221.6 kbps 211.7 kbps 206.8 kbps Notes • Fax communications cannot take place between the KX-TDA3480/KX-TDA0484 and KX-TDA0480 VoIP Gateway Cards. • Fax communications in the Super G3 mode are not guaranteed. Programming Guide...

  • Page 24: Voip Gateway/Ip-Pbx Interface Parameters

    2.2 Programming 2.2.4 VoIP Gateway/IP-PBX Interface Parameters Click 1.4 VoIP Gateway/IP-PBX Interface Settings in the main menu. Assign each parameter referring to the descriptions below. At any time during the session, you can: • Click ALL CLEAR to reset all parameters to the default values. •...
  • Page 25 2.2 Programming Parameter & Description Default Value Range Inter-Digit Time (s) 1-10s 1 to 10 Specifies the length of time (in seconds) within which subsequent digits of a dial number must be dialled. Generally, there is no need to change the default value. Digit End Code 0 to 9, #, * Specifies the delimiter code to be used to signal the...

  • Page 26: Hunt Pattern Parameters

    2.2 Programming 2.2.5 Hunt Pattern Parameters Click 1.5 Hunt Pattern (for Incoming Calls) in the main menu. Assign each parameter referring to the descriptions below. At any time during the session, you can: • Click ALL CLEAR to reset all parameters to the default values. •...
  • Page 27 2.2 Programming Parameter Descriptions The parameters indicated with "*" must be changed while the VoIP Gateway Card is in the "STOP" status (see "2.3.1 Status Control"). The changes do not have to be followed by a reboot to become effective. Hunt Group The parameters below are used to assign VoIP gateway ports 1 and 2 to the hunt groups.
  • Page 28 2.2 Programming Parameter & Description Default Value Range Hunt Group (Priority2) 1, 2, - Specifies the hunt group to which incoming calls are directed when the VoIP gateway port assigned to Hunt Group (Priority1) is busy. Detailed Explanations The card and the PBX are connected with two VoIP gateway ports, each of which has two communications channels, in much the same way as an ISDN BRI port.
  • Page 29 2.2 Programming Example 1 The following configuration is used to dedicate two VoIP gateway ports (four channels) to route incoming calls to both extension groups A and B. When there are four incoming calls to extension group A in this configuration, no call can be routed to extension group B.
  • Page 30 2.2 Programming Example 2 The following configuration is used to dedicate a single VoIP gateway port (2 channels) to individual extension groups. Specifically, with this configuration, calls to extension group A are routed through the port 1, and calls to extension group B are routed through the port 2. This configuration rejects the third call to extension group A, while reserving the other port (the other two channels) through which to route calls to extension group B.

  • Page 31: Address Translation Table-Gw Entry

    2.2 Programming 2.2.6 Address Translation Table—GW Entry Click 1.6 DN2IP (Dialed Number to IP Address Translation) in the main menu. Click 1.6.1 GW Entry. Assign each parameter referring to the descriptions below. At any time during the session, you can: •...
  • Page 32 2.2 Programming • Delete the desired gateway entry from the table at the bottom of the screen: Select the appropriate check box for the gateway entry you want to delete. Note If the gateway entry is registered to a DN2IP entry (see "2.2.7 Address Translation Table—DN2IP Entry"), no check box will be shown for the gateway entry.
  • Page 33 2.2 Programming Parameter & Description Default Value Range IP Address No default The following addresses are invalid: Specifies the IP address of the card. • Class D addresses • Class E addresses • Loopback addresses 0 (belong to no group), Group No.

  • Page 34: Address Translation Table-Dn2Ip Entry

    2.2 Programming 2.2.7 Address Translation Table—DN2IP Entry Click 1.6 DN2IP (Dialed Number to IP Address Translation) in the main menu. Click 1.6.2 DN2IP Entry. Assign each parameter referring to the descriptions below. At any time during the session, you can: •...
  • Page 35 2.2 Programming Click OK. You will see a confirmation screen. Note If your entry contains an invalid value, you will see an error screen. Click OK and try again with correct values. Confirm your entry and click OK. To return to the previous screen, click CANCEL. Parameter Descriptions The parameters indicated with "*"...
  • Page 36 2.2 Programming Parameter & Description Default Value Range GW No/Group No. GW No.: 0, GW No.: 0 to 511, Group No.: 1 Group No.: 1 to 256 Specifies the number of the destination gateway or gateway group. Detailed Explanations Automatic Route Redirection When more than one card is installed in a PBX, you can assign them to a single gateway group.
  • Page 37 2.2 Programming Example of DN2IP Entry Programming When DN2IP entries are programmed as in the table below, calls through card A arrive at gateway group 1, which includes cards B and C. Parameter To Card A To Gateway Group 1 (Cards B and C) Leading Number Remaining Number of Digits...

  • Page 38: Initialisation

    2.2 Programming 2.2.8 Initialisation Click 1.7 Initialization in the main menu. Click OK to initialise all parameters to the default values. To abort initialisation, click CANCEL. You will be taken back to the main menu (see "2.1 Main Menu for the Administrator"). Initialisation has to be followed by a reboot to make the default values effective for the parameters indicated with "#"...

  • Page 39: Maintenance

    2.3 Maintenance Maintenance 2.3.1 Status Control Click 2.1 Change RUN/STOP status in the main menu. Current RUN/STOP Status shows the current status of the VoIP Gateway Card. Click RUN or STOP for Status after changing. If you want to forcibly change the status from "RUN" to "STOP" while there are ongoing calls, click the Yes check box for Forced Disconnect when executing STOP.

  • Page 40: Maintenance Settings

    2.3 Maintenance 2.3.2 Maintenance Settings Click 2.2 Maintenance Settings in the main menu. Assign each parameter referring to the descriptions below. At any time during the session, you can: • Click ALL CLEAR to reset all parameters to the default values. •...
  • Page 41 2.3 Maintenance Parameter & Description Default Value Range Password Administrator Max. 16 characters Administrator-level log-in password. Password (Confirmation) No default Max. 16 characters Confirmation of the administrator-level log-in password. Programming Auto Disconnect Time Settings Parameter & Description Default Value Range 1 to 30 Programming Auto Disconnect Time (min) 1- 30min...

  • Page 42: Diagnosis

    2.3 Maintenance 2.3.3 Diagnosis This function is used to carry out the self-diagnostic programme manually. If failures are detected, there is a potential for trouble with the operation of the VoIP Gateway Card. Click 2.3 Diagnosis in the main menu. Click DIAGNOSIS to carry out the self-diagnostic programme.

  • Page 43: Log Information

    2.3 Maintenance 2.3.4 Log Information The function to collect log information is provided for engineer use only. However, in the case that a need should arise, this section provides the procedure for collecting the log information. Click 2.4 Log Information in the main menu. Click OK.

  • Page 44: Data Management

    2.4 Data Management Data Management It is strongly recommended that you download the configuration data and the address translation table (DN2IP) data from the VoIP Gateway Card for backup and archive purposes. The following sections provide the procedures for downloading and uploading. 2.4.1 Upload of Configuration Data Before uploading the data, place the card in the "STOP"...
  • Page 45 2.4 Data Management Do one of the following: • Click REBOOT to make the changes effective now. You will see a confirmation screen. Refer to "2.5.1 Reboot" and finish the reboot. • Click OK to return to the previous screen without rebooting. However, remember to reboot the card at the end of the programming session to make changes effective.

  • Page 46: Download Of Configuration Data

    2.4 Data Management 2.4.2 Download of Configuration Data Click 3.2 Download of Configuration data (VoIP Gateway –> PC) in the main menu. Click DOWNLOAD. At any time during the session, you can: • Click MENU to return to the main menu (see "2.1 Main Menu for the Administrator"). •...

  • Page 47: Upload Of Address Translation Table

    2.4 Data Management 2.4.3 Upload of Address Translation Table Before uploading the data, place the card in the "STOP" status (see "2.3.1 Status Control"). Click 3.3 Upload of DN2IP data (PC –> VoIP Gateway) in the main menu. Click Browse and choose a file to upload. At any time during the session, you can: •...
  • Page 48 2.4 Data Management Do one of the following: • Click REBOOT to make the changes effective now. You will see a confirmation screen. Refer to "2.5.1 Reboot" and finish the reboot. • Click OK to return to the previous screen without rebooting. However, remember to reboot the card at the end of the programming session to make changes effective.

  • Page 49: Download Of Address Translation Table

    2.4 Data Management 2.4.4 Download of Address Translation Table Click 3.4 Download of DN2IP data (VoIP Gateway –> PC) in the main menu. Click DOWNLOAD. At any time during the session, you can: • Click MENU to return to the main menu (see "2.1 Main Menu for the Administrator"). •...

  • Page 50: Others

    2.5 Others Others 2.5.1 Reboot Click REBOOT in the main menu. Click REBOOT. To return to the main menu, click CANCEL (see "2.1 Main Menu for the Administrator"). Note If the reboot operation is not successful, you will see an error page. To continue programming, click LOGIN Screen and log in again.

  • Page 51: Log Out

    2.5 Others 2.5.2 Log Out Click LOGOUT in the main menu. Click OK to log out. Programming Guide...
  • Page 52 2.5 Others Programming Guide...

  • Page 53: Installer Functions

    Section 3 Installer Functions This section provides operating instructions for the IP- GW4 Maintenance Utility when logged in as the Installer. Programming Guide...

  • Page 54: Main Menu For The Installer

    3.1 Main Menu for the Installer Main Menu for the Installer The IP-GW4 Maintenance Utility provides the following menu to a user logged in as the Installer. Maintenance Menu Section Reference 1.1 Change RUN/STOP status 3.2.1 Status Control 1.2 Maintenance Settings 3.2.2 Maintenance Settings Data Management Menu...

  • Page 55: Maintenance

    3.2 Maintenance Maintenance 3.2.1 Status Control Click 1.1 Change RUN/STOP status in the main menu. Current RUN/STOP Status shows the current status of the VoIP Gateway Card. Click RUN or STOP for Status after changing. If you want to forcibly change the status from "RUN" to "STOP" while there are ongoing calls, click the Yes check box for Forced Disconnect when executing STOP.

  • Page 56: Maintenance Settings

    3.2 Maintenance 3.2.2 Maintenance Settings Click 1.2 Maintenance Settings in the main menu. Assign each parameter referring to the descriptions below. At any time during the session, you can: • Click ALL CLEAR to reset all parameters to the default values. •...
  • Page 57 3.2 Maintenance Program Version Parameter Default Value Range Program Version Display only Programming Guide...

  • Page 58: Data Management

    3.3 Data Management Data Management The upload and update operations of the firmware data are closely related. First follow the procedure as described in "3.3.1 Upload of Firmware Data" to upload new firmware data to the VoIP Gateway Card, and then go on to "3.3.2 Handling of Firmware Page" to update the card with the newly uploaded firmware data.
  • Page 59 3.3 Data Management Firmware Status shows the current firmware status of page 0 and page 1, and Startup Page shows the current active page on startup. For details about these parameters, refer to "3.3.2 Handling of Firmware Page". Do the following to update the desired page with the uploaded firmware data: Click the option for the page whose current firmware status is not "Main Operation Mode"...
  • Page 60 3.3 Data Management • Click CANCEL to return to the Upload of Firmware data (PC –> VoIP Gateway) screen without starting up the card with the updated page. Switch the firmware status of the updated page from "NEW" to "Main Operation Mode". After the previous step (with or without a reboot), the firmware status of the updated page is still "NEW".

  • Page 61: Handling Of Firmware Page

    3.3 Data Management 3.3.2 Handling of Firmware Page Click 2.2 Handling of Firmware Page in the main menu. For details about the parameters on this screen, refer to the descriptions below. Click Main Operation Mode for Operation to set the desired page as the active page on startup.
  • Page 62 3.3 Data Management Parameter & Description Default Value Range Firmware Status Display only Indicates the current firmware status of page 0 and page 1. There are three kinds of status indication: • Main Operation Mode: Active firmware data on startup under normal operation. •...

  • Page 63: Others

    3.4 Others Others 3.4.1 Reboot Click REBOOT in the main menu. Click REBOOT. To return to the main menu, click CANCEL (see "3.1 Main Menu for the Installer"). Note If the reboot operation is not successful, you will see an error page. To continue programming, click LOGIN Screen and log in again.

  • Page 64: Log Out

    3.4 Others 3.4.2 Log Out Click LOGOUT in the main menu. Click OK to log out. Programming Guide...

  • Page 65: Index

    Index Programming Guide...
  • Page 66 Index HTTP Port Number Settings Hunt Pattern (for Incoming Calls) Automatic Route Redirection Initialisation Bandwidth 21, 23 Inter-Digit Time IP Address IP Address Settings Call Signaling Model IP Header 18, 20 Change RUN/STOP status 39, 55 CODEC Frame Settings 19, 21 Jitter Buffer Settings Default Gateway DHCP Settings...
  • Page 67 Index Upload of Firmware Data Username/Password Settings 40, 56 VAD (Voice Activity Detection) Voice CODEC Settings Voice Communication Detailed Settings VoIP Gateway/IP-PBX Interface Settings Programming Guide...
  • Page 68 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Copyright: This manual is copyrighted by Panasonic Communications Co., Ltd. (PCC). You may print out this manual solely for internal use with this model. Except above, you may not reproduce this manual in any form, in whole or part, without the prior written consent of PCC.

This manual is also suitable for:

Kx-tda0484

Table of Contents