Table of Contents
Advertisement
STOPPING THE ENGINE
Engine stop procedure
1. Park the machine on a level surface.
2. Lower the bucket to the ground.
3. Turn engine control dial (1) to the slow idle position
and run the engine for 5 minuets to cool the engine.
IMPORTANT: Turbocharger may be damaged if the
engine is not properly shut down.
4. Turn key switch (2) OFF. Remove the key from the
key switch.
5. Pull pilot control shut-off lever (3) to the LOCK posi-
tion.
If the engine does not stop with the key switch
turned in the OFF position
If the engine does not stop when the key switch is turned
to the OFF position (due to a machine or key switch mal-
function), pull engine stop knob (4) all the way to the
stop. The engine will stop.
NOTE: If the knob is pulled halfway, the engine may
not start or may stall during operation. Be sure
to push the knob to the fully retracted position
before restarting the engine.
OPERATING THE ENGINE
3-8
Slow Idle
LOCK Position
4
SA-390
1
M178-01-011
2
M1CC-01-005
3
M1CC-01-017
M1CC-01-012
Advertisement
Table of Contents
