Table of Contents
Advertisement
Section 3 - Configuration
In the Features menu on the bar at the top of the page, click Static Route to access the IPv4 Static Route settings, then click
IPv6 to configure the IPv6 Static Routes.
To configure the Static Route IPv4 settings, click the IPv4 link. Refer to Static Route - IPv4 on page 83
Click Save at any time to save the changes you have made on this page.
If you wish to remove a route, click on the trash can icon in the Delete column. If you wish
to edit a route, click on the pencil icon in the Edit column. If you wish to create a new route,
click the Add Route button.
If you clicked on Edit or Add Rule, the following options will appear:
Name
Enter a name for the rule.
DestNetwork
This is the IP address of the router used to reach the specified
destination.
PrefixLen
Enter the IPv6 address prefix length of the packets that will
take this route.
Gateway
Enter your next hop gateway to be taken when this route is
used.
Metric
Enter a route metric value ranging from 0 to 15. This value
indicates the cost of using this route.
Interface
Select the interface that the IP packet must use to transit out
of the router when this route is used.
D-Link DIR-2640 User Manual
Static Route - IPv6
84
- Quick Links:
- Quick Vpn
Hide quick links:
Advertisement
Table of Contents
