D-Link DAP-1325 User Manual page 22

N300 wi-fi range extender

Hide thumbs Also See for DAP-1325:

Table of Contents

DAP-1325 N300 Wi-Fi Range Extender

User Manual

6. Search for available wireless networks.

7. In the opened Wireless Network Connection window, select the wireless network DAP-

1325 and click the Connect button.

8. In the opened window, enter the network key (see WPS PIN on the barcode label on the

bottom panel of the device) in the Network key and Confirm network key fields and

click the Connect button.

After that the Wireless Network Connection Status window appears.

Now you can connect to the web-based interface of DAP-1325 for configuring all needed

parameters. To gain access to an external network (to the Internet), you also need to specify the

default gateway and the addresses of DNS servers.

If you perform initial configuration of the extender via Wi-Fi connection, note that

immediately after changing the wireless default settings of the extender you will need to

reconfigure the wireless connection using the newly specified settings.

Figure 12. The Network Connections window.

Page 22 of 92

Installation and Connection

Table of Contents

Show Quick Links

Table of Contents