Table of Contents
Advertisement
To change the final gear oil
1. Place the ATV on a level surface.
2. Place an oil pan under the final gear case to
collect the used oil.
3. Remove the final gear oil filler bolt, the final
gear oil level check bolt, the final gear oil drain
bolt and their gasket to drain the oil from the
final gear case.
2
1
1. Final gear oil drain bolt
2. Gasket
4. Install the drain bolt and its new gasket, and
then tighten the bolt to the specified torque.
Tightening torque:
Final gear oil drain bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
5. Refill with the recommended final gear oil to
the brim of the check hole as shown.
NOTICE: Be sure no foreign material en-
ters the final gear case.
1. Final gear oil
2. Gasket
3. Final gear oil level check bolt
4. Correct oil level
Recommended final gear oil:
See page 10-1.
8-26
[ECB00422]
1
2
3
4
8
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
