Table of Contents
Advertisement
Maintenance
Service Interval Chart
8 Hours
Grease the traction unit
Check engine oil level
g
Check for loose fasteners
Check tire pressure (20 psi)
1
Clean primary air filter
Check hydraulic oil level
y
Inspect hydraulic lines for leaks
1, 2
Change engine oil
Ch
Check battery electrolyte level
k b tt
l
t l t l
Check wheel lug nut torque (50 ft-lbs)
Check wheel lug nut torque (50 ft-lbs)
Check battery cable connections
Change engine oil filter (every other oil change)
Check engine speed (1200 rpm idle and 3600 full throttle,
g
(
Check spark plugs
1, 3, 5
Change hydraulic filter
g
y
Inspect fuel lines for leaks
1, 6
Change hydraulic oil
Replace primary and secondary air filters
y
1
Replace the fuel filter
Touch up chipped paint
1. More often in dusty, dirty conditions.
2. Change oil after the first 50 operating hours.
3. Change the hydraulic filter and torque the lug nuts after the first 8–10 operating hours
4. For severe duty or rental applications, change every 100 operating hours.
5. For severe duty or rental applications, change every 200 operating hours.
6. For severe duty or rental applications, change every 400 operating hours
25 Hours
100 Hours
l
3
3
1, 4
1
y
200 Hours
75)
)
400 Hours
Yearly/Storage
25
Advertisement
Table of Contents
