Table of Contents
Advertisement
Installing the Chassis Brackets
Step 1
Remove the rack-mount brackets from the accessory kit and position them beside the chassis.
Figure 1: Attaching Mounting Brackets for a 19-inch Rack (A903-RCKMNT-19IN3)
Figure 2: Attaching Mounting Brackets for a 23-inch EIA Rack
Step 2
Position one of the brackets against the chassis side, and align the screw holes.
Step 3
Secure the bracket to the chassis with the screws removed when performing Step 1. The recommended maximum torque
is 28 in.-lb (3.16 N-m).
Step 4
Repeat Step 2 and Step 3 for the other bracket.
Installing the Cisco NCS 4206
2
Installing the Cisco NCS 4206
Advertisement
Table of Contents
