BATL (MAIN) BOARD REMOVAL
NOTES:
Refer to
"Handling the LVDS FFC Connector" on page 3
The Sheet (BAT-L Metal Bottom) and Sheet (BAT-L Metal Side) are not included with the LCD Panel and
must be replaced when replacing the LCD Panel.
A Remove 6 screws and disconnect 6 connectors from BATL Board to detach from LCD Panel
(Refer to
"Handling the LVDS FFC Connector" on page
B Release 2 clips and slide-out Bottom Bracket to detach from BATL Board
C Release 2 clips and slide-out Side Bracket to detach from BATL Board
KDL-40NX725/55NX725/60NX725
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
to disconnect the LVDS Connector.
3)
C
B
A
NOTE: The components identified by shading
and
mark are critical for safety. Replace only
!
with part number specified.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
251
A-1819-123-A
BATL BOARD, COMPLETE
(KDL-40NX725/55NX725 ONLY)
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION.
251
A-1823-588-A
BATL BOARD, COMPLETE
(KDL-60NX725 ONLY)
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION.
NOTE: The components identified by a red outline and a
mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
255
254
253
252
251
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
252
4-272-182-71
BRACKET BOTTOM (BAT-L METAL)
253
4-272-181-71
BRACKET SIDE (BAT-L METAL)
254
4-256-432-01
SHEET (BAT-L METAL BOTTOM)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
255
4-256-431-01
SHEET (BAT-L METAL SIDE)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
2-990-421-41
SCREW, (+PSW) (M3X6)
47