Table of Contents
Advertisement
SC-F6400 Series/SC-F6400H Series
Note:
You can also start by clicking the printer icon on
the desktop taskbar and selecting Software
Update.
C
Select your printer, and then click
for the latest software.
D
Select the software and manuals you want to
update, and then click the Install button to start
the installation.
When Firmware Updater is displayed, the latest
firmware is available. Select Firmware Updater
and click the Install button to automatically
start Firmware Updater and update the printer
firmware.
Follow the on-screen instructions.
User's Guide
Introduction
c
Do not turn off the computer or printer while
updating.
to check
Receiving Update Notifications
A
B
C
Using Web Config
Provides an overview of starting the software and the
functions provided.
Starting Procedure
Start the software on a computer that is connected to
the same network as the printer.
A
B
C
32
Important:
Start EPSON Software Updater.
Click Auto update settings.
Select an interval for checking for updates on
the printer's Interval to Check box, and then
click OK.
Check the printer's IP address.
Confirm that the printer is ready to print.
Press
(menu), and then select General
Settings - Network Settings - Wired LAN
Status.
Start a Web browser on the computer that is
connected to the printer over the network.
Enter the IP address of the printer in the
address bar of the Web browser and press the
Enter or Return key.
Format:
IPv4: http://IP address of printer/
IPv6: http://[IP address of printer]/
Example:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Advertisement
Table of Contents
