hit counter script
Epson PowerLite Pro Cinema 6010 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. PowerLite Pro Cinema 6010
  6. User manual
Epson PowerLite Pro Cinema 6010 User Manual

Epson PowerLite Pro Cinema 6010 User Manual

Home theater projector
Hide thumbs Also See for PowerLite Pro Cinema 6010:
Table of Contents

Advertisement

Quick Links

®
PowerLite
Pro Cinema 6010
Home Theater Projector
User' s Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson PowerLite Pro Cinema 6010

Summary of Contents for Epson PowerLite Pro Cinema 6010

  • Page 1 ® PowerLite Pro Cinema 6010 Home Theater Projector User’ s Guide...

  • Page 2: Table Of Contents

    Contents Introduction Projector Parts Remote Control Optional Accessories Registration and Warranty Using This Manual Setting Up the Projector Choose a Location Installing the Projector Connecting the Cables Connecting Video and Computer Equipment Making Other Connections Installing Batteries in the Remote Control Turning the Projector On and Off Turning On the Projector Turning Off the Projector...
  • Page 3 Advanced Color Adjustments Adjusting the Gamma Setting Adjusting RGBCMY Locking the Projector Making Detailed Adjustments Using the Menu System Changing How the Menus Display Adjusting the Picture Quality Input Brightness Settings Sharpness and Picture Quality Settings Color Settings 3D Setup Adjustments for Computer Images Split Screen Setup Selecting Memory Settings and Resetting the Projector...
  • Page 4 Maintenance Cleaning the Lens Cleaning the 3D Glasses Cleaning the Projector Case Cleaning and Replacing the Air Filter Replacing the Lamp Resetting the Lamp Usage Timer Checking the Projector Status Storing the Projector Transporting the Projector Problem Solving What To Do When the Lights Come On or Flash Solving Picture Problems Solving Remote Control Problems Where to Get Help...

  • Page 5: Introduction

    Auto Iris system that constantly controls the light output based on the gamma and black/white levels of your projected content, for perfectly adjusted images and deepest blacks ■ ® EPSON C Fine 3LCD technology for reliable picture quality, increased contrast ratio and uniform colors ■...

  • Page 6: Projector Parts

    Projector Parts Front Lamp cover Horizontal lens shift dial Air exhaust Focus ring Auto lens shutter Projector lens Back Cable clip holes External 3D IR port Introduction Remote receiver Air intake Component ports Video port HDMI ports Zoom ring Vertical lens shift dial Power and warning lights...

  • Page 7: Projector Control Panel

    Bottom Projector Control Panel Power button Source button Front adjustable feet Menu button Enter button Mounting bracket attachment points Menu navigation/ vertical keystone buttons Retractable cover Escape button Introduction...

  • Page 8: Remote Control

    Remote Control On button Turns projector on HDMI Link button Enables and disables the HDMI link function 2D/3D button Toggles between 2D and 3D projection Menu navigation buttons Default button Resets menu selection to default values Menu button Displays the projector’s menus Auto Iris button Adjusts the Auto Iris...

  • Page 9: Optional Accessories

    Setup sheet. In addition, Epson offers free Extra Care equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See your Extra Care Home Service brochure for details.

  • Page 10: Using This Manual

    Note: Contains important information about your projector. Tip: Contains helpful projection tips. Need additional help? Take advantage of Epson’s automated support services 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Use this site to view FAQs or product information and e-mail Epson.

  • Page 11: Setting Up The Projector

    Setting Up the Projector Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image. Choose a Location You can install the projector for the viewing setups shown below, as well as rear projection. Front Ceiling Setting Up the Projector...
  • Page 12 Keep the projector level and place it at a height so its lens is even with the top or the bottom of the screen and is centered horizontally. If this is not possible, use the lens shift dials to reposition the image. You can use lens shift to move the image up or down by nearly its full height, and left or right by about one-half its width (for details, see page 22).
  • Page 13 The size of the image is determined by the distance from the projector’s lens to the screen. Depending on your display settings and how you use the Zoom ring, the actual size may differ. Use these tables as a guide for projector placement: 16:9 aspect ratio Diagonal image size Projection distance...
  • Page 14 To determine the exact image size when you know the projection distance (or the exact projection distance when you know the desired image size), you can use the Image Size Calculator. This program is available on the EPSON website at epson.com/support (U.S.) or epson.ca/support (Canada).

  • Page 15: Installing The Projector

    Installing the Projector To install the projector, you first need to determine the location, based on the size of your screen (maximum diagonal image size). Use the tables on page 13 as a guide to positioning the projector. To suspend the projector from a ceiling, you will need the included projector mount designed for the projector.
  • Page 16 The following illustrations show the dimensions of the projector: 2.4 in. (60 mm) 15.6 in. (396 mm) 6.3 in. (160 mm) Setting Up the Projector 18.3 in. (466 mm) 9.2 in. (233 mm) 11.8 in. (300 mm) 5.9 in. (150 mm) LENS 6.2 in.

  • Page 17: Connecting The Cables

    Connecting the Cables Connecting Video and Computer Equipment You can connect the projector to many types of video equipment, such as a Blu-ray ™ Disc /DVD player, digital tuner, cable or satellite box, video game console, camcorder, or digital camera. You can also connect it to a desktop or laptop PC or Apple details on compatible video formats, see page 75.
  • Page 18 For best results, connect your video equipment to the port, if possible. If your HDMI equipment doesn’t support HDMI, connect it to either the (for high quality, Component component video) or (for composite video) port. Video Note: You need to use a version 1.4 or higher HDMI cable to use the projector’s 3D features. If you aren’t sure if your HDMI cable is version 1.4 or higher, contact your cable manufacturer.

  • Page 19: Making Other Connections

    Making Other Connections Connect the power cable and other cables described below, depending on how you plan to use the projector. ■ Plug the power cable into the projector and a grounded electrical outlet. ■ To use an AV controller with the projector, connect a 9-pin null modem serial cable to port.

  • Page 20: Installing Batteries In The Remote Control

    Installing Batteries in the Remote Control The remote control uses two AA batteries. Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately. 1. Release the tab and lift open the cover. 2. Insert two new AA batteries as shown. 3.

  • Page 21: Turning Off The Projector

    The power light flashes while the projector warms up. If you don’t see a picture, you may need to change the image source as described on page 21. Turning Off the Projector 1. Turn off any equipment connected to the projector. 2.

  • Page 22: Positioning The Image

    If you press the source button to move through the list and select the desired source. Note: If an image does not appear, see “Problem Solving” on page 65. To temporarily turn off the image and darken the screen, press the Blank button on the remote control.
  • Page 23 The vertical position (V) can be adjusted by up to 96% of the height of the screen, while the horizontal position (H) can be adjusted by up to 47% of the width of the screen. If one side of the image is taller than the other, make sure the projector is parallel to the screen.
  • Page 24 When setting up the projector, make sure that it is placed level to the screen in order to provide the best possible image quality. If you must set up the projector at an angle, use the vertical keystone buttons to correct the image shape. Setting Up the Projector...

  • Page 25: Making Basic Adjustments

    Making Basic Adjustments Follow the instructions in this chapter to make basic adjustments to the image shape, size, color, and quality. For further refinements, see “Making Detailed Adjustments” on page 34. Focusing and Zooming Use the focus ring to sharpen the image. Use the zoom ring to reduce or enlarge the image.

  • Page 26: Choosing The Aspect Ratio

    Choosing the Aspect Ratio In many cases, video signals are automatically resized to fit on your screen when Auto selected as the Aspect setting. You may need to change the size of the image (or aspect ratio) for certain image types by pressing the button on the remote control.

  • Page 27: Viewing 3D Images

    Viewing 3D images To view 3D content, you must first connect a 3D-compatible video device to one of the HDMI ports on your projector. You will also need a pair of EPSON or EPSON-compatible M-3Di active shutter glasses. Note: Make sure to point the remote control directly at the projector while viewing 3D content.

  • Page 28: Projecting In Split Screen Mode

    Projecting in Split Screen mode You can use the Split Screen feature to simultaneously project two images from different image sources next to each other. You can control the Split Screen feature using the remote control or the projector menus. The Split Screen feature is only available with certain combinations of video sources.

  • Page 29: Choosing The Color Mode

    2. Press the button. You see this screen: Menu 3. To select an input source for the other image, select the select the input source, select sources, if necessary.) 4. To switch the images, select the 5. To change the image sizes, select the option, press , and press Enter...

  • Page 30: Advanced Color Adjustments

    Select the image source you want to adjust, then press the control. Choose from these settings: ■ Cinema for viewing movies in a dimly lit room. ■ Dynamic for projecting the brightest picture available. ■ Living Room for watching television programs during the day.

  • Page 31: Adjusting The Gamma Setting

    Adjusting the Gamma Setting You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. Gamma presets make minor adjustments to mid-tone values.

  • Page 32: Adjusting Rgbcmy

    Adjusting RGBCMY Use this feature to adjust the hue, saturation, and brightness for each of the red (R), green (G), blue (B), cyan (C), magenta (M), and yellow (Y) color components. 1. Press the RBGCMY 2. Use the u or d button on the remote control to select the color you want to adjust, and press the button.
  • Page 33 4. Choose from these options: ■ Child Lock to disable the Ppower button on the projector’s control panel unless it is pressed for about 3 seconds. Since you can still use the remote control to turn on the projector, you may want to keep it away from children’s reach. Note: Even if the Child Lock is on, the projector turns on and starts projecting if the rear power switch is turned on when the Direct Power On option is enabled.

  • Page 34: Making Detailed Adjustments

    Making Detailed Adjustments You can use the projector’s on-screen menus to make detailed adjustments to the image quality—such as the brightness, contrast, sharpness, and color. You can also change the menu display, sleep mode settings, and other projector features. Using the Menu System You can access the menu system either from the remote control or the buttons on the projector’s control panel.

  • Page 35: Changing How The Menus Display

    4. When you’re finished, press the button to exit the menu system. Menu To display one of the line menus, press the bottom of the image: ■ Press the l or r button to adjust the setting. ■ Press the button to close the line menu when you’re done.

  • Page 36: Adjusting The Picture Quality

    Adjusting the Picture Quality Before fine-tuning the image using these adjustments, make sure you have already selected the best Color Mode for your picture and viewing environment, as described on page 29. Then use the settings in this section to finish adjusting the picture to your liking. Most image quality settings are saved independently for each input signal type, input source (Video, HDMI, Component, PC), and color mode.

  • Page 37: Power Consumption

    Note: This setting can be used only when HDMI1 or HDMI2 is selected as the image source (see page 21). This setting cannot be used when EPSON Super White is set to On. If your video equipment has an HDMI port and you’ve connected it to the projector using an HDMI cable, set the level of the projector to match that of the video equipment.

  • Page 38: Sharpness And Picture Quality Settings

    Sharpness and Picture Quality Settings If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to correct it. ■ Sharpness Image > Sharpness Use this function to make lines and edges appear more distinct in the image. This setting is stored separately for each image source and color mode setting.

  • Page 39: Color Settings

    ■ Noise Reduction Signal > Advanced > Noise Reduction Note: This is not be available with a signal input through the PC port. This setting reduces flickering of analog images. You can select from 3 levels of noise reduction. ■ Frame Interpolation Signal >...

  • Page 40: Skin Tone

    ■ Abs. Color Temp. Image > Abs. Color Temp. Shifts the color balance between red and blue, making the image appear warmer or cooler. ■ Skin Tone Image > Skin Tone Makes fine adjustments to the tint and controls the amount of red or green in the image. Also useful for correcting black-and-white images, if they look tinted.

  • Page 41: 3D Setup

    ■ Gamma Image > Advanced > Gamma You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. See page 31 for more information.
  • Page 42 ■ 3D Format Signal > 3D Setup > 3D Format Use this setting to select the 3D format supported by your video device. In most cases, the projector will correctly detect the 3D format when this option is set to only select the doesn’t properly display 3D images.

  • Page 43: Adjustments For Computer Images

    Adjustments for Computer Images In addition to the settings described previously, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry or contains dark vertical bands, you may need to adjust the settings yourself.
  • Page 44 Note: Depending on the source and resolution of each input, the two screens may not appear to be of equal size when the Equal option is selected. ■ Source Split Screen Setup > Source Select this option to open the Source menu and select which inputs should be displayed in split screen mode.

  • Page 45: Selecting Memory Settings And Resetting The Projector

    Selecting Memory Settings and Resetting the Projector Your projector comes with 10 memory locations where you can save customized settings to obtain the best picture quality for each of your video inputs. Creating Memory Settings Memory settings can be used to store most of the picture quality settings on page 38 and color settings on page 39.

  • Page 46: Renaming Memory Settings

    Renaming Memory Settings You can rename memory settings so that they are easier for you to recognize. 1. Press the Memory 2. Select Rename Memory 3. Select the memory name you want to change, then press the selection screen is displayed. 4.

  • Page 47: Resetting The Projector

    Resetting the Projector If the image quality isn’t what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings. To restore the settings in a specific menu (such as the Image or Settings menu), open that menu, select , and confirm as needed.

  • Page 48: Customizing Projector Features

    Customizing Projector Features Use the settings in this section to adjust the image size and position, suppress on-screen text, and select basic setup options. Image Sizing Before adjusting any of these settings, make sure you have already selected an appropriate aspect ratio for the type of picture you’re viewing (see page 26).

  • Page 49: Screen Options

    ■ Zoom Caption Pos. Signal > Zoom Caption Pos. Lets you adjust the shape and position of the image so that subtitles are visible (available only if the Aspect setting has been set to zoom position. Screen Options ■ Messages Extended >...

  • Page 50: Video Signal

    ■ Video Signal Extended > Input Signal > Video Signal Leave this setting on NTSC or PAL (for standard TV formats). ■ Component Extended > Input Signal > Component Change this setting to match the type of equipment connected to the Component port. For component video, select or select YCbCr...

  • Page 51: Adjusting The Lcd Alignment

    ■ High Altitude Mode Extended > Operation > High Altitude Mode Adjusts the speed of the fan so it can properly cool the projector at higher altitudes. Turn this setting on if you are using the projector at an altitude of 4921 feet (1500 meters) or higher.
  • Page 52 Follow these steps to adjust the projector’s LCD alignment: 1. Press the button on the remote control. Select Menu and then select LCD Alignment 2. Set the Correct LCD Align. 3. Set Select Color color convergence. Note: You can only adjust the red or blue color convergence. Green is the standard color panel and cannot be adjusted.
  • Page 53 6. Use the arrow buttons on the remote control to correct any visible misalignment in the corner highlighted by the orange box. 7. When you’ve finished adjusting the highlighted corner, press the remote control to adjust the next corner. Repeat this process for each of the four corners. 8.

  • Page 54: Using Hdmi Link

    Using HDMI Link When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them using the HDMI Link control buttons on the projector’s remote control. This lets you use just one remote control to operate many commonly used features on all your devices.

  • Page 55: Changing Hdmi Link Settings

    4. Set up your connected devices so their HDMI CEC-compatible functions are enabled. For details, refer to the device manufacturer’s documentation. Changing HDMI Link Settings 1. Press the button on the projector’s remote control. HDMI Link 2. Select Device Connections 3.

  • Page 56: Maintenance

    Maintenance Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also may need to clean the air filter to prevent overheating. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual.

  • Page 57: Cleaning The 3D Glasses

    Caution: Never rub the lens with abrasive materials. Use only lens cleaning fluids that are designed for cleaning optics. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface. Cleaning the 3D Glasses Use the included lint-free cloth (do not use paper towels) to gently wipe the 3D glasses whenever you notice dust or dirt on the surface.

  • Page 58: Cleaning The Projector Case

    Cleaning the Projector Case Before you clean the case, turn off the projector and unplug the power cord. ■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. ■ To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent.
  • Page 59 If the dirt is difficult to remove or the filter is broken, replace it. You can purchase air filter part number V13H134A39 from an authorized EPSON reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S.

  • Page 60: Replacing The Lamp

    Turn off this product when not in use to prolong the life of the projector. You can purchase lamp part number V13H010L69 from an authorized EPSON reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S.
  • Page 61 Follow these steps to replace the lamp: 1. If the projector is on, press the P power button on the projector twice or the button on the remote control and wait for the power light to stop flashing. 2. Turn off the power switch on the back of the projector and unplug the power cord and any cables.
  • Page 62 7. Lift up the lamp handle and gently pull the lamp out of the projector. Warning: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 8.

  • Page 63: Resetting The Lamp Usage Timer

    10. Tighten the lamp cover screw. 11. Reset the lamp usage timer, as described on page 63. Resetting the Lamp Usage Timer After replacing the lamp, plug the projector back in, turn on the power switch on the back of the projector, and press the Ppower button on the projector or the control.

  • Page 64: Storing The Projector

    Pack the projector in its original packaging or equivalent. Transporting the Projector Note: Epson shall not be liable for any damages incurred during transportation. The projector contains many glass and precision parts. When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials.

  • Page 65: Problem Solving

    Problem Solving This section explains how to interpret the projector’s status lights, solve problems with the picture and remote control, and contact technical support. What To Do When the Lights Come On or Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs.
  • Page 66 If the lamp isn’t cracked, reinstall it, plug the projector into an outlet, and turn the power on. If this doesn’t fix the problem, or if the lamp is cracked, contact Epson for assistance (see page 72).

  • Page 67: Solving Picture Problems

    Cause and solution There is a fan or sensor problem. Turn off the projector and unplug it from the electrical outlet. Then contact Epson for assistance (see page 72). There is an internal problem. Turn off the projector and unplug it from the electrical outlet.
  • Page 68 3D content does not display or does not display correctly. ■ Press the 2D/3D necessary. ■ Make sure you are within the 3D viewing range (see page 11). ■ Check that your video device and media are both 3D-compatible. Refer to the documentation that came with your video device for more information.
  • Page 69 ■ If the function key doesn’t let you display simultaneously on both screens, you might need to use the Display utility in the Windows Control Panel to make sure that both the LCD screen and external monitor port are enabled. From the Windows Control Panel, open the utility.
  • Page 70 The picture is blurry. ■ Make sure the Input Signal ■ There may be dirt on the lens. Clean the lens as described on page 56. ■ Adjust the focus (see page 25). ■ Make sure the lens is not fogged by condensation. If you’ve just moved the projector from a cold environment, wait a couple of minutes before using it.

  • Page 71: Solving Remote Control Problems

    Solving Remote Control Problems The projector doesn’t respond to remote control commands. ■ Make sure you’re within about 32 feet (10 m) of the projector, and the remote control is aimed at the projector’s front or back sensor within the ranges shown below. 32 ft (10 m) ■...

  • Page 72: Where To Get Help

    To use the EPSON PrivateLine Support service, call (800) 637-7661 and enter the PIN on the EPSON PrivateLine Support card that came with your projector. This is the fastest way of speaking to a live representative, and it’s free. This service is available 6 Time, Monday through Friday, for the duration of your warranty period.

  • Page 73: Specifications

    Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels 0.74 inch (18.8 mm) wide Lens F=2.00 to 3.17 Resolution (native format) 1920 × 1080 pixels, 1080p Brightness Normal mode: White light output up to 2400 lumens (ISO 21118 standard) Color light output up to 2400 lumens Dynamic contrast ratio Up to 200,000:1...
  • Page 74 Remote Control Range Batteries Dimensions Height Width Depth Weight Electrical Rated frequency Power supply Power consumption Environmental Temperature Humidity Operating altitude Specifications Approximately 32 feet (10 m) AA × 2 5.6 inches (140 mm), not including adjustable feet 17.6 inches (446 mm) 15.6 inches (395 mm);...

  • Page 75: Compatible Video Formats

    Safety United States FCC Part 15B Class B (DoC) UL60950-1 2 Canada ICES-003 Class B CSA C22.2 No. 60950-1-07 ™ Pixelworks DNX Compatible Video Formats The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal.
  • Page 76 You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the EPSON website at epson.com/support (U.S.) or epson.ca/support (Canada). Specifications...

  • Page 77: Notices

    Notices Important Safety Information Follow these safety instructions when setting up and using the projector: ■ Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. ■...
  • Page 78 ■ The following people should limit 3D content viewing: People with a history of photosensitivity People with heart disease People in poor health People who are sleep deprived People who are physically tired People under the influence of drugs or alcohol Anyone who has ever experienced epileptic seizures or sensory disturbances triggered by flashing light effects SOME LIGHT PATTERNS MAY INDUCE SEIZURES IN PERSONS WITH NO PRIOR...

  • Page 79: Fcc Compliance Statement

    ■ Allow the lamp to cool for one hour before replacing it. ■ Unplug the projector during lightning storms or when not in use for extended periods. ■ Don’t place the projector or remote control on top of heat-producing equipment. ■...

  • Page 80: Copyright Notice

    Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

  • Page 81: Trademarks

    Trademarks EPSON, PowerLite, and C Fine are registered trademarks, 1080Perfect is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark, DigiScan and AccuCinema are trademarks, and Extra Care is a service mark of Epson America, Inc.

Table of Contents