1-4-5. SE-987 Board
n
When replacing the SE-987 board, perform the Pan/Tilt adjustment in reference to Section 2-4.
1. Remove the SY-359 board. (Refer to Section 1-4-4.)
2. Disconnect the fl exible fl at cable from the connector
(CN101) on the SE-987 board.
3. Remove the screw, then remove the SE-987 board.
4. To install, reverse the removal procedure.
1-16
PSW2.6 x 6 (Large)
SE-987 board
Front side
of main unit
Flexible
flat cable
CN101
EVI-HD7V