Table of Contents
Advertisement
POWR
Crankcase, connecting rod, and piston
4
c
4
3 b
3
E
Connecting rod and piston
5
installation
E
1
NOTICE
Do not reuse the piston pin clips 4 and
connecting rod cap bolts 5, always replace
them with new ones.
TIP
• When installing the connecting rod to the pis-
• Do not allow the piston pin clip ends to align
2
NOTICE
1
Do not scratch the pistons or break the pis-
E
ton rings.
TIP
• Make sure to install the piston rings so that
• After installing the piston rings, make sure
5-114
1. Install:
• Piston 1
• Connecting rod 2
• Piston pin 3
• Piston pin clips 4
• Connecting rod cap bolts 5
ton, make sure that the "Y" mark a on the
connecting rod faces toward the front mark
b on the piston crown.
with the piston pin slot c.
2. Install:
• Oil ring 1
• 2nd ring 2
• Top ring 3
the "1T" mark on the top ring and the "2T"
mark on the 2nd ring face up.
that they move smoothly.
E
1
2
3
4
5
6
7
8
9
Advertisement
Chapters
Table of Contents
