Table of Contents
Advertisement
POWR
1
Oil cooler, oil pump assembly, and drive gear
E
2
Oil pump drive gear assembly
1. Install:
• Bearing
TIP
Use a pipe that is at least 22 mm (0.87 in) long
and has an outer diameter of 55 mm (2.17 in)
and an inner diameter of 45 mm (1.77 in). (For
USA and Canada)
Bearing inner race attachment:
90890-06661
Drive gear assembly installation
1. Install:
• Drive gear assembly
Installation steps:
1. Hold the holder 1.
2. Apply engine oil to the threads of the drive
gear assembly bolt 2.
3. Tighten the drive gear assembly bolt 2.
TIP
The drive gear assembly bolt has left-hand
threads. Turn the bolt counterclockwise to
tighten it.
Drive gear assembly bolt:
80 N·m (8.0 kgf·m, 59.0 ft·lb)
5-49
E
1
2
3
4
6
7
8
9
Advertisement
Chapters
Table of Contents
