D-Link DIR-842 User Manual page 105
Ac1200 wave 2 mu-mimo wi-fi gigabit router
Hide thumbs
Also See for DIR-842:
- User manual (233 pages) ,
- Quick installation manual (83 pages) ,
- Quick install manual (13 pages)
Table of Contents
Advertisement
DIR-842 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
User Manual
Parameter
DNS relay
When all needed settings are configured, click the APPLY button.
In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a
fixed IPv6 address in the local area network for a device with a certain MAC address). The router
assigns IPv6 addresses in accordance with the specified pairs only when the Stateful value is
selected from the Mode of dynamic IPv6 address assignment drop-down list in the
Dynamic IPv6 Addresses section.
Figure 86. Configuring the local interface. The IPv6 tab. The section for creating MAC-IPv6 pairs.
To create a MAC-IPv6 pair, click the ADD button (
address field. You can choose a device connected to the router's LAN at the moment. To do this,
select the relevant MAC address from the drop-down list (the field will be filled in automatically).
Then in the IP address field, enter an IPv6 address which will be assigned to the device with the
specified MAC address. In the Hostname field, specify a network name of the device for easier
identification (optional). Click the APPLY button.
To create MAC-IPv6 pairs for the devices connected to the router at the moment, click the
KNOWN CLIENTS button. In the opened window, select the needed device and click the OK
button. To view the latest list of the connected devices, click the REFRESH button.
To edit the settings for the existing MAC-IPv6 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the APPLY button.
To remove a MAC-IPv6 pair, select the checkbox located to the left of the relevant line in the table
and click the DELETE button (
IPv6 pair in the editing window.
Move the switch to the right so that the devices connected to the
router obtain the address of the router as the DNS server address.
Move the switch to the left so that the devices connected to the
router obtain the address transmitted by the ISP or specified on the
Advanced / DNS page as the DNS server address.
). Then click the APPLY button. Also you can remove a MAC-
Page 105 of 210
Configuring via Web-based Interface
Description
). In the opened window, fill in the MAC
- Quick Links:
- Access Point or Repeater
Hide quick links:
Advertisement
Table of Contents
